We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I am considering adding small clocks to my craft show offerings...the kind that use a nice chunk of wood and a 1" to 3" mechanism that just presses into a drilled hole.
I am also considering making "pocket watches" the same way, but turning the wood in the shape of a pocket watch and attaching a fob.
Do any of you make these? Have you found there is a market for them?
I am considering the same thing with kaleidoscopes and, possibly, yo-yos. Is there a market worth going after?
Pardon me if I post on the general board also - I wanted to cover both bases.
Joe
Re: Market for small clocks, kaleidoscopes, yo-yos?
Re: Market for small clocks, kaleidoscopes, yo-yos
JimMiles
>Joe I have done small clocks at shows for 4 - 5 years. Probably average selling 1 or 2 per show in the $20 - $30 range. The clock fit up is about $5. Natural edge stuff seems to have the most interest. I have friend that does the "pocket watches" he seems to do much better with them. He also does a similiar compass.
Re: Market for small clocks, kaleidoscopes, yo-yos?
Re: Market for small clocks, kaleidoscopes, yo-yos
robo hippy
>I have done a few yo-yo's and they do sell from time to time, but not with any regularity. They went through another popular phase several years back when someone figured out that if you took a small ball bearing and put it around the axel, the things would spin forever (just under 60 seconds for wood axel, over 12 minutes for bearing/trans axel). Biggest secret for yo-yo's is to weigh the pieces on a scale and get them the exact weight, to tenths of a gram.