More lathe progress...
dwr
>... Here is a shot of the Tail Stock I am making from 1.5" ACME Rod... and a couple of ACME Nuts... MT#2 internal and a 5/8" through hole.
Knowledge You Can Build On — Est. 1998
More lathe progress...
dwr
>... Here is a shot of the Tail Stock I am making from 1.5" ACME Rod... and a couple of ACME Nuts... MT#2 internal and a 5/8" through hole.
More lathe progress...#2
dwr
>Picture of the ACME Nuts getting a hair cut to shoulder length...
More lathe progress...#3
dwr
>ACME Nuts and a quarter for scale... I like 'em big!
Lookin' good!
Mike Cunningham (Cape May)
>You still have time for the season opener of American Lathe.
Re: Lookin' good!
dwr
>Mike,
You got that dialog ready for me to review? I need to be working on my stage presence and getting into character...;)
Here is the nearly finished assembly. This thing is going to be big... the 1.5" ACME Rod is 18" long!
End still needs to be machined for the chrome handle... but almost there. If all goes well, maybe we can deliver to the powder coater in a week or two...
Dave
Re: Lookin' good!
Mike Cunningham (Cape May)
>That's a Bear! I'll get Nubs on the phone for paint........
I'm really looking forward to the finished product. I've got three lathes here, your story and pics have me seriously thinking about a 4th......home-built this time.
Thanks
Mike
Go for it, Mike!
dwr
>Yeah,
This is my third lathe. If you are willing to take the time and effort, you can build a nice lathe for a fraction of the retail cost, especially if you or some friends can do the CAD drawings and fabrication, thus limiting the outsourcing.
I will eventually do a detailed write-up to encourage others that are considering taking the plunge.
When I post the final stages, there will be some cool revelations that I hope will spur others on. Let me know if you decide to take the plunge and want any help.
Dave