Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Cedar

Posts

Cedar

#1

Cedar

Ken Oakley-Sunny St. Cloud, Fla.

>I picked up some locally, (Central Florida), cut cedar logs and have cut most of them into 1" thick slabs. It really has some spectacular grain and color and I was wondering if anyone has ever turned items of cedar. I have a lot of small pieces that I thought could be cut into pen turning blanks. TIA.

Re: Cedar

#2

Re: Cedar

Bill McWhirter

>Our local south Georgia cedar turns and finishes beautifully, and smells good while you are working it. Just need to let it dry like anything else. I sand on the lathe and then buff and wax with the Beall system. I can easily get a really slick finish that is a pleasure to hold in your hands. I am sure that others may have different ways to finish.

Re: Cedar

#3

Keith Tompkins

Re: Cedar

keith tompkins

>Ken, be careful when turning cedar....the properties that make cedar rot-resistant and bug-resistant will cause respitory symptoms in many turners. Be sure to protect your lungs!

Re: Cedar

#4

Re: Cedar

John Veerkamp

>Ken,

I really like to turn cedar. As mentioned above my favorite finish is wax. It lets some of the aroma thru whereas film finishes will not. Lovely to hold. If you can leave in knots , fractures and some sapwood for contrast you can get really spectacular results.

John

Re: Cedar

#5

Re: Cedar

MikefromTn.

>I've not turned ceder but have cut and resawn ceder planks to line my quilt chests. Your right about the lung problems. Learned the hard way.I break out the resperator now. I have trouble with Mahagony too. Messes with the nose membranes.