stud makover
Posts
Re: stud makover
#2
Re: stud makover
Bob Moffett
>Very nice! It gives me an idea for our club.
Re: stud makover
#3Re: stud makover
Thad in Wartown
>Amazing transformation...makes me want to learn segmenting.
~ Thad
Re: stud makover
#4Re: stud makover
Dave Neighbors
>Very nice work...How many hours do you have in this?
Re: stud makover
#5Very impressive
Cyril Griesbach
>
Re: stud makover
#6Re: stud makover
john lucas
>Ian I love what you've done with this. I still think we overlook too much cheap wood. Great job.
Re: stud makover
#7Re: stud makover
Bill Howatt
>A beautiful piece both in shape and color combined with the grain of the pieces. If you had said it was made from an expensive exotic from the wilds of some far-away place, I would have believed it.
Bill
Re: stud makover
#8Re: stud makover
IAN
>dave, not as many hours as you would expect,
2-hrs, cutting strips and segments. all the strips were the same thickness and width, only variable was the length of segments.
2-hrs, glueing up the 7 rings and the 4 piece base.
2-hours to flatten and glue stack the rings.
2 hours turning and sanding the piece, applied sanding sealer before final sanding.
few hours dying the piece, ( never done one like this before so some experimentation was involved)
couple of hours applying the wipe on poly over the course of 4 days (one coat per day).
half hour to buff out the finish on the beale, after it cured for a week.
total time about 15 hours, results priceless.
sorry couldn't resist that one.
IAN
Re: stud makover
#9Re: stud makover
IAN
>thanks everyone for your comments,
IAN
Re: stud makover
#10Amazing
Frank G ( Ingleside Texas )
>I don't turn as yet but I can see this in in some high dollor gallery for big bucks.






