Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Sacrificial wood?

Posts

Sacrificial wood?

#1

Sacrificial wood? 

Jamie Donaldson

>


img

Re: Sacrificial wood?

#2

Re: Sacrificial wood?

John Lucas

>Jamie I'm ready to sacrifice. Send it to me. Beautiful bowl.

Re: Sacrificial wood?

#3

Re: Sacrificial wood?

Jamie Donaldson

>When I arrived to teach a week long class at the Campbell Folk School last Sunday, behind the new turning studio I found 6~8 of these defective maple logs about 30" in diameter dumped in the log pile that were intended for student learning and practice wood. Knowing that the insect damaged and discolored wood was inappropriate for such use, but lacking a suitable truck to haul it back to my shop in KY for proper environmentally sensitive disposal, my assistant Joe Johnson and I were forced to render it into turning blanks. My heart skipped each time the bandsaw sliced the crosscut sections into quartered blanks that could be mounted on the 10 student's new Powermatic 3520B lathes, and the resulting mulch piles were a testament to their anxious endeavors! We even managed to clog the new 10HP cyclone system! I have never experienced such fine wood available for teaching, and managed to bring home these 2 pieces as a reminder of the wanton destruction I witnessed!

Re: Sacrificial wood?

#4

Re: Sacrificial wood?

Ed Kelle

>That sure is some sweet "defective" wood. Beautiful bowl!

Re: Sacrificial wood?

#5

Keith Tompkins

Re: Sacrificial wood?

keith tompkins

>HI Jamie, beautiful wood, even better bowl.

In your week-long course, what topics did you cover?

Re: Sacrificial wood?

#6

Re: Sacrificial wood?

Carole Valentine

>Jamie, I know there must be a perfectly good explanation for those chuck marks on the foot of that nice bowl - like "It's not finished yet", right? ;))

Re: Sacrificial wood?

#7

Re: Carole-the wood was too wet.....

Jamie Donaldson

>...to sand and finish, so I'll cure it for a while in the Polish kiln (brown paper bag)until it is ready.

Re: Sacrificial wood?

#8

Re: Keith- we have mostly beginners.....

Jamie Donaldson

>.. in the classes, so I cover turning from A~Z. Each class is different and I like to tailor the instruction to the situation, including variables such as the wood on hand! This was the 1st class that included turning square "objects," even though some were rectangular, parallelograms,etc! I'm more concerned with processes than products, but each student should have a variety of pieces to take home to show what they accomplished when they ask to buy a lathe!