Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Visit to Nick Cook's shop

Posts

Visit to Nick Cook's shop

#1

Visit to Nick Cook's shop

Mark Kauder, Phenix City, AL

>Whenever I am in Atlanta, and in the area of his shop, I like to stop and see Nick Cook. You never know what you will find or learn.

Saturday, I had to take my son, and a friend and his small brother to an all day event. It is about 1 mile from Nick's, so hopeing that though it was Saturday, Nick might be in the shop. He was. He was giving a woodturning orientation to a bunch of Boy Scouts. So I listened (alway learning about skews), and puttered around his ship, trying to stay out of the way. What did I see and learn:

1) Since I am sort of in the market for a new drill press sometime down the road, I played with the new one that Nick had. A Delta 17-990x 17" model http://www.amazon.com/exec/obidos/ASIN/B0000A25TO/ref=nosim/galidoo-20

Just might be the choice for me, though it is a bit more than I was going to spend.

2) I counted the lathes currently setup in his shop, which, not counting the office area is about 20'x30'. He has a big General with a bed extension that will turn about 10' long, one of the new Jet-Mini's with the 12" swing (saw this last time), an older Jet-Mini, 3 Powermatic 3520's (two are B models), two older Rockwell/Deltas that do the majority of his production work and #3 described below.

3) There was a prototype (not secret) Powermatic, built like an updated version of a VB-36. Very nice looking, and Masive. 3HP motor (if I saw right). Nick says he does not think Powermatic could sell enough to justify making them, but I have my doubts.

4) Nick told me that the AAW has decided not to have John Hill be the auctioneer at the National Symposium in Portland. Going to have a professional auctioneer. I think this is one of the dumbest ideas ever. I am sure there must be some politics involved. I go to at least three symposiums a year, maybe as many as 5, that John does the auctioneering on. Yes, he uses some of the same jokes every time, every year, but John knows turning, and is able to talk a price up better than anyone. Yes, I have a bias. John was an early supporter of my work, owns a couple of them, and talks very nicely about them when he talkes up one of my donations at the symposiums - thus at least to some extent raising the prices of the ones I have sold over the years. But I truly think this is a dumb move on the AAW's part. I am going to send an email to them expressing this.

4) Observed once again that Nick needs a Shop Maid. I think we would find another lathe or two, and maybe a body or two in the mess.

I truly like Nick Cook - always finds time to talk to a visitor, as long as you don't mind that he will keep working while he does.

A good couple of hours.

Mark

Re: Visit to Nick Cook's shop

#2

Re: Visit to Nick Cook's shop

John Lucas

>I couldn't agree more. I don't get to see Nick often because my trips to Atlanta are usually brief. I do try to stop by when I can. We always talk a little photography while there as well as woodworking. He's always got people around and answers thier questions. I keep wondering when he turns enough to make a living.

He's got great pricess on Wine corks and cocobolo and 3/8" hardwood dowels for wine stoppers.

Re: Visit to Nick Cook's shop

#3

Re: Visit to Nick Cook's shop

Bill Crommett

>Mark: This is not the first dumb thing the AAW has done With the goofs and arrogant response that I got at the Tacoma symposium, I have trouble getting up my interst to attend another.

BILL

Re: Visit to Nick Cook's shop

#4

Careful Mark.....

TDaniel

>the AAW hit men will get you!

Re: Visit to Nick Cook's shop

#5

Re: Careful Mark.....

Mark Kauder, Phenix City, AL

>Then I will be in good company.

Mark

Re: Visit to Nick Cook's shop

#6

Re: Visit to Nick Cook's shop

Stephen Mushinski

>I agree Mark about not using John Hill. I think as long a John wished to do it the job was his for ever. I have been to many auctions and John is a good as any. When the guy took over from John last year I left as I could not understand a word he said. I had no idea if he was on $5 or $500. This is a problem with many professional auctioneers. Not being able to understand what the heck they are saying. I guess they are starting to have too much money to spend. Free lathe give aways every year and now professional services at the symposiums. Now if John has decide he rather not do it that is different. He gave so much of himself to the AAW I do hope he is not being treated poorly.

Steve

Re: Visit to Nick Cook's shop

#7

Re: Visit to Nick Cook's shop

john lucas

>I'll agree John Hill is a great guy. He's also extremely involved in the AAW so I would find it hard to believe this decision was made without his knowledge. Personally I find the auctions very long and boring even though John does a wonderful job moving it along. I don't stay for them even when I have a piece donated. I certainly can't bid on anything until I win the lottery. Like Mark says, I've heard all of John's jokes. I wonder if the AAW is trying to change things simply to introduce some variety. It may not work but you never really know until you try.