Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Box Now Has Bottom...

Posts

Box Now Has Bottom...

#1

Box Now Has Bottom...

Ron McKinley

>Last week I posted about accidently turning through the bottom of a nice lidded box. I was determined to salvage this project so I turned a tapered tenon on another piece of the same type wood and after making sure it was a snug fit I parted it off leaving about 1/8" protruding from the base. Then I reverse chucked it and machined the base, leaving it about 1/16" proud to "lift it off the table" as Alan Lacer says.......Ron


img

Re: Box Now Has Bottom...

#2

Fantastic Save!

Jennifer@Indy.USA

>It looks great Ron! Even the grain seems to match.

Nice job.

Jen

Re: Box Now Has Bottom...

#3

Re: Box Now Has Bottom...

gil Jones

>Excellent save, Ron!!!

Re: Box Now Has Bottom...

#4

Leo Van Der Loo

Well done Ron, next time you could try to cut

Leo Van Der Loo

>a couple of grooves at the seam and beside it, to break the grain lines up, that would make the difference between the two grains even less noticeable.

Yes better not have next time, still just keep it in mind. ;-)))

Have fun and take care

Leo Van Der Loo

Re: Box Now Has Bottom...

#5

Re: Awesome save! Excellent match!

Allen Neighbors

>

Re: Box Now Has Bottom...

#6

I love a good save. Great box.

john lucas

>

Re: Box Now Has Bottom...

#7

Re: Box Now Has Bottom...

George Van

>You have to be happy with your efforts on this on Ron.Nice save!