Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Bed Extention for Nova lathe Questions?

Posts

Bed Extention for Nova lathe Questions?

#1

Bed Extention for Nova lathe Questions?

Barry Irby

>I have a Nova DVR. Got a project that invloves turn something olnger than a bowl. Anyone know a good way to get an estention for the bed? Wonder if Tim Geist woudl sell me one cheap? Anyone got Tim's number?

Re: Bed Extention for Nova lathe Questions?

#2

Re: Bed Extention for Nova lathe Questions?

Jorge Castaneda

>Barry,

Here is Tim's e-mail:

Tvgeistmfg@aol.com

Re: Bed Extention for Nova lathe Questions?

#3

Re: Bed Extention for Nova lathe Questions?

Ralph

>Make certain you know which style of bed you have and get the -right- one. The current DVR uses a different style then the one from a few years back.

Re: Bed Extention for Nova lathe Questions?

#4

Re: Bed Extention for Nova lathe Questions?

RevDoug

>I'll send you an email with Tim's number. I started to post it but decided that maybe that wasn't the best idea in the world. Anyway, the number should be in your inbox.

Turn 'em round,

Re: Bed Extention for Nova lathe Questions?

#5

Re: Bed Extention for Nova lathe Questions?

Ed in Sptbg.

>Barry, Woodcraft has the DVR 3000 extension on sale in their closeout section for $139.99. Still kinda high, but I nedded one too so I paid it, not knowing where else to look.

Re: Bed Extention for Nova lathe Questions?

#6

Steven Antonucci

How long do you need it for?

steve antonucci

>I'm thinking outside of the box...

If it was a one time thing, you could unbolt the two sections and rig up a temporary with some 2X and some steel flat bar stock. May not be perfect, but it wouldn't cost that much.

Plan B, if you don't disassemble the lathe would be to build it on a "platform" like a tablesaw or your bench which would be placed at the right distance and secured. You'd remove the tailstock "and through bolt to the platform. The toolrest could just be another platform or you could make my long toolrest for outboard turning like below and just not swing out the headstock. Blackpipe and some 2x4s...

steve


img

Re: Bed Extention for Nova lathe Questions?

#7

Re: Bed Extention for Nova lathe Questions?

Barry Irby

>Thanks! I was expecting to pay $239. You just saved me a hundred bucks. I ordered one. Now watch, Time Geist will come back with one even cheaper. Thanks again.

Re: Bed Extention for Nova lathe Questions?

#8

Re: How long do you need it for?

Barry Irby

>Steve, you look like a man after my own heart. Looks exactly like something I would rig up to get by. Actually, I just bought an extension on close out, but I don't want to modify my stand, so I am going to try something Tim Geist suggested once. I am going to just bolt the extension on and see how strong it is. I just have four legs to turn. I may prop the end up just to take the strain, but I won't do much more. As Captain Kirk says "Shields Up".

Re: Bed Extention for Nova lathe Questions?

#9

Re: How long do you need it for?

Jorge Castaneda

>Barry,

I wish I knew this before, I did bedposts and got away making a plywood box bolted between the head and tail stocks, a couple hours and a couple bucks for the bolts, most of the time was going to the hardware.The posts were square in the scetion of the box...