Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

expect the unexpected *LINK*

Posts

expect the unexpected *LINK*

#1

expect the unexpected *LINK*

joaz

>While working with a student the other day, he decided he wanted to try a natural edge hollow form in cherry burl,a little to advanced for a beginner,

but his excitement was infectous so I said sure let's go for it.

We had no problems turning the outside, however, I noticed a small crack that didn't seem to create a problem. When we drilled out the center I noticed a lot of gunk on the bit. He started turning off the bark and started hollowing the inside when suddendly......KA BOOM. No one was hurt, but there was a lot of heart bounding.

As a teacher, I learn a lot from my students. But this time I learned very important lesson....expect the unexpected

See the pics!


img

http://www.maine-web.com/woodturning

Re: expect the unexpected *LINK*

#3

Re: expect the unexpected

Donna Banfield

>I hope no one was hurt! That could happen to anyone, though, regardless of skill and/or experience, right?

Even if you put duct tape (a trick, I think that Rudy Osolnick used) around the exterior, it could still come apart while spinning?

Re: expect the unexpected *LINK*

#4

Re: expect the unexpected

Jim Shewan

>There's been some wreckage around here too.


img

Re: expect the unexpected *LINK*

#5

Re: expect the unexpected

Jim Shewan

>There's been some wreckage around here too.


img

Re: expect the unexpected *LINK*

#6

Re: expect the unexpected

joaz

>I have found burl with nails, fence, and one time, a large ball from a black powder gun.

But I always try to prepare for the worst with safe gear and fast reflexe's combined with a healthy respect for the unexpected.

I do love turning burl because when every thing works right you end up with really spectacular wood.

Re: expect the unexpected *LINK*

#7

Re: Donna-Rude most often used...

Jamie Donaldson

>... masking tape, followed by filament shipping/wrapping tape. The filament tape provides the strength, and the masking tape keeps the adhesive from the filament tape from leaving a sticky residue on the turning.

Re: expect the unexpected *LINK*

#8

Good Tip!

Jorge Castaneda

>Thanks Jamie