Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Jet Band Saw Question

Posts

Jet Band Saw Question

#1

Jet Band Saw Question

C.W.Stivison

>I am in the market for a band saw and think I would like to have a Jet 14". Jet has 3 models and I have it narrowed down to the DX or CS. Question is it worth the extra $100 for the Dx. It has a bigger motor and easier blade tensioning. My guess is the Dx will be a better saw in the long even though I may have to rob the piggy bank for the extra 100.

Thanks CW

Re: Jet Band Saw Question

#2

Keith Tompkins

Re: Jet Band Saw Question

keith tompkins

>There is no substitute for horsepower...I say spring for the bigger motor.

Re: Jet Band Saw Question

#3

Re: Jet Band Saw Question

John Kyler

>I think CS is closed stand...

and the DX is thew deluxe which has some extra goodies...

Not sure as the DX I got was also an anniversary saw..

And always wish I had the Powermatic with that 1 1/2 hp motor..

Re: Jet Band Saw Question

#4

Re: Jet Band Saw Question

John Scheideman

>It really depends on what you want to do with your saw. If you are wanting to cut bowl blanks you definitely need the HP. You will be sorry if you are underpowered. However, if all you are going to cut is flat stock in the 3/4" thick range, the cheaper saw may be fine.

My two cents....

John

Re: Jet Band Saw Question

#5

Re: Jet Band Saw Question

Randy Johnson Connersville, IN

>I have one of the older 14" Jet saws that has the 1HP motor. Jet still sells a saw identical to mine.The two you are looking at seem to be improved versions. After initial cost of the saw I added the Carter quick release and a riser.

Even doing some resawing at close to capacity it has never bogged down. It HAS bogged down a few times recently since I started cutting bowl blanks - particulary with green wood.

Plan on adding the cost of a riser to the cost of the saw.

I'm not sure exactly how the Jet quick release works but I have never regretted adding the Carter to my saw. I noticed that the Jet website sells the Carter so that may be what they put on their saws. That said, from the picture on the website it looks like the handle is on the left side and with a Carter it is on the right.

You didn't say anything about the dust port. Nothing throws sawdust all over the place like a bandsaw. Both of the saws you are considering have a 4" dust port. Mine has a 2" that is pretty much a joke. When I moved to the new shop and installed a cyclone I cut a piece out of the bottom blade cover and installed a 4X4X10 HVAC boot. There is 5" going to the saw that splits to the boot and the original "port". It doesn't get all the dust but it gets most of it.It isn't clear how the four inch port on the saws you are considering is placed but it seems that it is NOT just a bigger version of what I got with mine. That's bound to be a plus.

The upgrade of the Carter alone was $150. If you get some version of what it does PLUS a bigger motor for about $100 I'd go for it.

Re: Jet Band Saw Question

#6

Ric Taylor

Re: Jet Band Saw Question

Ric Taylor

>Some Jet 14" bandsaws have a built-in dust collection port and some do not. Be sure to get one that has the port. It will be on the back side behind the lower wheel.

Ric

Re: Jet Band Saw Question

#7

Re: Jet Band Saw Question

Pete LaBelle

>I am heading down the path to get the 14DX saw. Yup, I will probably some time invest in the Carter guides. Have investigated the Delta, Powermatic and Rikon saws. All of their 14" saws seem good. Have steered away from the Rikon saws for facts like the drive belts are with the lower wheel enclosure. Without a dust collection system, there appears no place for the dust to eventually find its way out. Powermatic was a little too pricy for me. Delta & Jet are very similar in my book. Since most of my shop is JET, I'm heading that way. Current saw is only 1/2 hp, so was looking at the 1hp unit. Discovered the 1.25hp unit and a couple other features (like 9 spoke wheels), and have decided upon that one. The JET blocks will be immediately replaced with Kool blocks based on info gained on this site. Woodcraft has a 10% off on JET days, April 14th. Salesman says the saw can be ordered or purchased up till the 14th, including the 10% off. They will just book the sale on the 14th.

There's a lot of good equipment out there. Decisions between them are tough, as the differences are minor. Cost still weighs in though.

Good luck on your purchase !

Pete

Re: Jet Band Saw Question

#8

I own the deluxe with riser block

Mike F

>It is a good saw. It is important to note that it uses a very odd sized blade. This is not well documented. I believe that the blade is 105.5" or something wierd. The folks at Timberwolf made me some 106" blades after some back and forth.

105" blades are easy to find off the shelf, but they don't fit...