Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Anybody have the Rikon mini?

Posts

Anybody have the Rikon mini?

#1

Anybody have the Rikon mini?

Gary Evans Tallassee, TN

>They go on sale Saturday at WoodCraft for $199, regular $250. I could swear I heard one calling my name when I was over there earlier today. 8^]

Seriously, I am considering popping for one of these while they are on sale. Any stories good or bad?

Gary

Re: Anybody have the Rikon mini?

#2

Re: Anybody have the Rikon mini?

Bill Stehman

>Gary,

My dvr went down about two weeks ago and I needed something so bought one. Not impressed.

The Jet dealer called about five days ago after receiving the new 12x20 minis and they are $299 through April 30th. I will get one of those and pawn the rikon off once my dvr is up and running.

Re: Anybody have the Rikon mini?

#3

Re: Anybody have the Rikon mini?

ken

>I got one for Christmas last year.(2005)That was my 1st lathe and 1st experiance at turning.Sorry you aren't happy with yours,but i have probably turned a few hundred bowl's on it.Some up to 11 1/2" and to say the least that is one tough little mach ,but even more impressive is there service and tech support.You won't find and,any better.I realized when I bought it,it wasn't going to put out work like a nova or some of the big boy's,but it has handled everything that I put on it without any trouble at all.Good luck.

Ken

Re: Anybody have the Rikon mini?

#4

What happened to the DVR?

Carole Valentine

>As a fellow DVR owner, I always like to know!

Re: Anybody have the Rikon mini?

#5

Re: Anybody have the Rikon mini?

Bill McWhirter

>I have one and it's OK. I wish that I had spent the extra money and gotten the Jet Mini with the electronic variable speed. Changing the belt is not hard, but it is certainly a nuisance. Go for something with variable speed! If you get the Rikon, you will be trading up within a year.

Re: Anybody have the Rikon mini?

#6

Re: What happened to the DVR?

Bill Stehman

>Carol,

Upon returning from vacation my DVR would not turn. They overnighted electronic parts twice but I ended up sending all the electronic and electrical parts back to them. Great service for a 3 1/2 year old lathe. But still waiting.

The Rikon is made in China, says most everything. Sanding or even using steel wool slows it right down on a 9" bowl. Just not impressed with the fit and quality of it compared to a jet. It's my opinion and I'm sticking with it.... chuckle

Re: Anybody have the Rikon mini?

#7

Re: Anybody have the Rikon mini?

Russ Fairfield

>The only comparison I have is at the local Woodcraft store where there are 3 Rikon and 3 Jet mini-lathes that have been in classroom use for about 13 months. The guy who teaches pencrafting likes them both. I teach the other woodturning classes and the only good thing I can say about the Rikon is that it has a spindle lock and the belts are easier to change. Other than that, they are in need of constant repair because of loose or broken parts, while the Jet-minis just keep on running.

Re: Anybody have the Rikon mini?

#8

Re: Anybody have the Rikon mini?

Ken

>It's been a year and I still love mine.As for bogging down during sanding it is possable that you have a defect somewhere.I would take it back to where you bought it.I turn 11" bowls without any trouble,so theres no way it should bog down during sanding.As for getting rid of it,no way.The reason I got the Ricon was because of the 12"swing over the Jet 10",Plus I did a great deal of research and there was more neg.response on the Jet than the Ricon.As for the belt changing,I can change it in a few sec.Buy what you think is best for you,but this is just my opinion after using it for a year.

Re: Anybody have the Rikon mini?

#9

Re: Anybody have the Rikon mini? *LINK*

Stan Townsend

>I bought a Rikon to use at shows for demonstrating the Elbo Tool. I am very pleased with the lathe and found that changing belt speed selections was easier than most minis. I also like the small tool rack furnished with the lathe.I have not had any problems with it in about a year of use.


http://www.elbotool.com

Re: Anybody have the Rikon mini?

#10

Re: Anybody have the Rikon mini?

Bill Stehman

>Gary,

The new jet with spindle lock and indexing head is $199 and the EVS with same is $299. The new 1220 with spindle lock and indexing head is $299 and a dealer here will let me have a stand for $119 which is a welded frame. Interesting though, the woodcraft store is not participating in Jets pricing. The 1220 will be $460 May 1st.

Re: Anybody have the Rikon mini?

#11

Re: Anybody have the Rikon mini?

Nelson

>Woodcraft prices are same as you quoted, not sure who's telling you what.

Re: Anybody have the Rikon mini?

#12

Re: Anybody have the Rikon mini?

Carlos Cabrera

>I have a Rikon and I think it is horrible. I ordered a Jet Mini today.

Re: Anybody have the Rikon mini?

#13

Re: Anybody have the Rikon mini?

John Meikrantz

>I have had a Rikon mini for about a year now, and have had no problems at all. I just put the extension on it to turn a baseball bat with my son. Mine has proven to be very solid with a few minor finish details. I would definitely buy again. I was impressed with the larger capacity, and it just seemed like a beefier machine than the Jet. I haven't looked at the new Jets, however.

JohnM