Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Thompson gouges

Posts

Thompson gouges

#1

Thompson gouges

John Lucas

>I finally got to play with a low power microscope to look at the edges of my M2 gouge vs the Thompson CMPv10 gouge. It was only 70 power so I didn't learn a whole lot. The metal on both gouges was polished with a green compound. The Thompson gouge looks satin and the M2 looks mirror. Under 70 power the Thompson gouge actually looks smoother but it looks like cast iron. The M2 has little furrows but is shinier. Unfortunately I need maybe 500 or 750X to see the edge. They both look sharp at 70x. Hopefully tomorrow I'll go to the biology department and borrow a powerfull microscope.

Re: Thompson gouges

#2

Re: Thompson gouges

Doug Thompson near Cleveland

>John,

The last time we talked about this I used a 10X comparator to look at the edge, this told me squat. Except it did prove a 80 grit wheel will give the same edge on any steel. Remember this is a powder steel so it will look different under a microscope and affect the way it will polish.

I want to see the results before and after the same use. This test will help decide the ratio of skews and scrapers made from a sheet of CPM 10V bought today. There is no room for error with this steel it's expensive... put it this way I paid 2,800 for a sheet I carried to the car, one trip. It still needs to be cut into strips, machined, ground, polished, heat treated and sharpened.

Either it's going to be the best skew out there or i'm going to have a lot of scrapers. It does make a very good scraper so I'm not worried.

Post the results ASAP

Re: Thompson gouges

#3

Re: Thompson gouges

Phil Powell

>Doug,

Do you have a net site? If so what's the address?

Re: Thompson gouges

#4

Re: Thompson gouges

Fog Tanner

>You can reach Doug by e-mail at dougswoodworking@aol.com. He will normally get back to you fairly quickly. I have ordered several times, the first time I ordered I was turning wood with my Thompson two days later. I think you would be hard pressed to find anyone easier to do business with than him. A number of people in my club have bought Thompson gouges and all of them are extremly happy. And we are getting ready to make another group order for those that missed out on the last time. Also saves on shipping cost and Dougs time on packing - lets him make more tools...

Re: Thompson gouges

#5

Re: Thompson gouges

Philip Duffy

>All I know is that the spindle gouge is great! I am begging for a big-dog skew!! Philip

Re: Thompson gouges

#6

Doug I need scrapers when avail.

Bernie

>

Re: Thompson gouges

#7

My Thompson gouge

Jennifer@Indy.USA

>John, I haven't looked at my Thompson gouge under a microscope, or my magnifying glasses...just my every day glasses :)

...I acquired one last Fall at the Indy fest but have to admit that I hadn't used it much due to the fact that I do so love my Crown Pro PM 3/8" bowl gouge and just have a comfort zone with it. It recently got to the point where it was too short to be able to use the Vari Grind jig on and so I diverted to the Thompson gouge. I have found that I do love this 3/8" gouge. It is smaller in diameter than my Crown 3/8" (due to that confusing measuring system that nobody can agree on) but it's the perfect size for my finish cuts on my bowl work. I was originally using it in a Hosaluk handle but found that the balance was off and needed it in a lighter weight handle. I think Dave is definitely on to something with these tools! The scrapers sound very interesting!

Thanks Dave!

Jen :)

Re: Thompson gouges

#8

Re: My Thompson gouge

John Lucas

>Jennifer That's all that really counts is how you feel about the tool. I'm liking mine I just want to understand more about how to sharpen them for best use. I found a microscope of the proper power and lighting but the instructor is gone for a few days so I'll have to check back.

Re: Thompson gouges

#9

My appologies :(

Jennifer@Indy.USA

>Doug,

I'm feeling like a complete idiot...as I see I referred to you as Dave. Ugh.

Somebody shoot me!

:(

Re: Thompson gouges

#10

Re: My appologies :(

Fog Tanner

>Shoot you????????????.... not with the current babe shortage, besides if I have to hang around on the rock what makes you think you are getting off that easy. I have been getting mail addressed to Foy all my life, starts with the right letter. Doug and Dave both start with a D, are four letters long - sounds close enough.....

Re: Thompson gouges

#11

No appologies needed

Doug Thompson near Cleveland

>Jen, don't even think twice, we knew what you were saying. I need to thank you for the good words. This year at the Indyfest you need to try the same tool with a .010 change and see how they compare.

I'll see you at the Indyfest,

Dave

Re: Thompson gouges

#12

Re: No appologies needed

Mark Kauder, Phenix City, AL

>Doug,

After all the "Air Play" you need to bring plenty to Ohio Valley.

Mark

Re: Thompson gouges

#13

Re: No appologies needed

Mark Kauder, Phenix City, AL

>PS, I want to check out your v-flute gouges as well.

Mark

Re: Thompson gouges

#14

Dave is a good name :)

Dave Peebles Lyons, Ohio!

>

Re: Thompson gouges

#15

Re: Dave is a good name :)

Mark Kauder, Phenix City, AL

>Where have you been hiding - DAVE?

Mark