Pyramid Point Tool
Terry Fox
>Can anyone please point me to some instructions for the proper use of this tool? It's supposed to be the 'bee's knees' for making small beads, but not for me, so far. Thanks for your help.
Terry
Knowledge You Can Build On — Est. 1998
Pyramid Point Tool
Terry Fox
>Can anyone please point me to some instructions for the proper use of this tool? It's supposed to be the 'bee's knees' for making small beads, but not for me, so far. Thanks for your help.
Terry
Re: Pyramid Point Tool *LINK*
John Lucas
>Terry I hope you can download this. I couldn't wait long enough to see if it works. My afternoon assignment just got here. It's from the AAW website.
http://www.woodturner.org/resources/videos/2005_fall_point_tool.wmv
Re: Pyramid Point Tool
Mike Brazeau
>Terry - I made from a shock absorber almost two years ago and I love it. Someone from our guild said he realized what he was doing wrong when he watched me demoing one night at our guild. To do a bead, first scrape a groove on each side by having two facets horizontal and pushing tool straight in to the work. Then start working the shape of the bead from the bottom edge towards the top, unlike with a skew or detail gauge, where you work from the top down. Nothing to it, nice symmetrical beads.
It's not that bad
Dominic Greco in Richboro PA
>Terry,
I'm a recent convert to the 3 point tool. For a couple years now I tried and tried to roll small beads with a skew. To say that the results were a disaster is putting it mildly. Then I tried a 3 point tool at last Bill Grumbine's BBQ last year. It was like night and day. So I made my own and have had a ton of success using it to roll beads of all sizes.
Just watch the video that John posted and I'm sure you'll get the hang of it. Remember, to rub the face of the bevel against the face of the wood. And when it comes time to roll the bead, roll the tool, keeping the face of the bevel against the work.
Good luck!
See ya around,
Dominic
Re: Pyramid Point Tool
Danny Wells
>This is a great little tool. I made two sizes a few years ago. I use it a lot for turning beads in ivory for the mouthpieces of my turkey calls. I read somewhere that tool was used early on by ivory turners. I had previously used a small skewchigouge that I made, and it worked OK but the point tool works much more consistently. I learned Stacey's technique of uphill on the beads by trial and error. Works great that way.
Re: Pyramid Point Tool
jeff myroup
>A friend of mine is an avid turkey hunter. He wants me to make some calls for him. Do you have any plans and pics of your calls?
Jeff
Re: Pyramid Point Tool *LINK*
Danny Wells
>Hey Jeff,
Probably what he wants is what is called "pot" call or friction call, which is basically a shallow bowl with a sound board and slate or glass striking surface. There are plans and kits for getting started at Custom Sawing's website.
You can also get a tremendous amount of information from Custom Calls Online forum at
http://www.customcalls.com/cgi-bin/yabb2/YaBB.pl?board=turkey_brd
I turn trumpet yelpers. Here is a sample of my yelpers. This is Pink Ivory and African Blackwood w/ polished aluminum ferrule and elephant ivory mouthpiece. This one won 4th place in the NWTF National Decorative call contest this year.
Custom Sawing
Re: Trumpet yelper pic 2
Danny Wells
>Here's look at the bell of the trumpet. I call this Danny's Star #1.
Email me if you'd like more information about turkey calls.