Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Beall buffing with Jet Mini

Posts

Beall buffing with Jet Mini

#1

Beall buffing with Jet Mini

C.W.Stivison

>I just purchased a beall buffing system and thought of using it on my jet mini with the Beall #2 mandrel adapter. Is this a good idea ,bad idea or is there a better idea other than buying a motor. Spent the weekend in Bristol Tenn. and visited the Woodcraft store in Johnson City. Great people there and a great place to spend an afternoon.

Thanks

CW

Re: Beall buffing with Jet Mini

#2

Re: Beall buffing with Jet Mini

Mike Rubes, Apex, NC

>Hi CW,

I've been spinning the Beall system on my Jet Mini for about 4 years with no complaints at all. I find it to work well.

Good luck,

Mike

Heading to the Wood Store tomorrow in Apex, NC!!

Re: Beall buffing with Jet Mini

#3

Re: Beall buffing with Jet Mini

Chip in Plano

>I have the same setup. Almost sold my Mini when I upgraded to a bigger lathe but it's nice having a dedicated setup...plus I can always transfer it to a bigger lathe. The best tip I can share is to place a folded towel over the bedways. It doesn't take but one slip to put a nasty dent in a finished piece. A little padding is too easy not to do. DAMHIKT!!!

Re: Beall buffing with Jet Mini

#4

Re: Beall buffing with Jet Mini

Ron McKinley

>I have a separate motor for the flap wheels that run at 1750rpm. For the bowl buffs I use on my Jet Mini and run them at 3,000rpm. I mounted a faceplate to a piece of wood connected with a long nut that fits the bowl buffs. I can screw in each buff into the adapter. ....Ron


img

Re: Beall buffing with Jet Mini

#5

Ron, could you...

Clem Wixted, Jonesboro, AR

>...elaborate on:

I mounted a faceplate to a piece of wood connected with a long nut that fits the bowl buffs

Thanks,

Clem

Re: Beall buffing with Jet Mini

#6

Re: Beall buffing with Jet Mini

robert davis

>i use a reclaimed furnace blower motor for my deall. iprefer that to using a lathe. also have another 3350 motor for bowl buffs.

Re: Beall buffing with Jet Mini

#7

Re: Beall buffing with Jet Mini

keith zimmerman, Normal, IL

>I recently converted my Beall 3-on system to individual buffing wheels so it would fit on the #2 MT adapter. I find it much more efficient.

keithz

Re: Beall buffing with Jet Mini

#8

Re: Ron, could you...

Ron McKinley

>Here's some pics Clem........Ron


img

Re: Beall buffing with Jet Mini

#9

Re: Ron, could you...

Ron McKinley

>Clem: I tried to post 3 pics but it only took one. If you need more info e-mail me and I'll send them that way......Ron


img