Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Rosewood-yellow heart box

Posts

Rosewood-yellow heart box

#1

Rosewood-yellow heart box

John Lucas

>Here is a yellow heart, rosewood, and maple burl box I did this weekend. The top actually started out to be thicker with more of a curve but the pieces flew out. I routed and glued in the yellow heart. I used yellow glue. Then I went in to eat dinner. When I came back out and started turning some of the pieces flew out and the glue was almost fresh underneath. I've never had that happen. At least 30 minutes had gone buy. I cut that away, rerouted, and reglued using Gorilla glue. Turned it the next morning. I'm guessing the rosewood somehow slowed the glue bond. I've glued lots of yellow heart with narry a problem but haven't worked with rosewood much.


img

Re: Rosewood-yellow heart box

#2

top view 

John Lucas

>


img

Re: Rosewood-yellow heart box

#3

I really like the concept

Ron in Drums PA

>But it's a little busy with all that is going on.

No offense

Re: Rosewood-yellow heart box

#4

Re: Rosewood-yellow heart box

Rick Davenport

>I like the vessel and I like the lid.

I'm not sure they go together though.

Just my semi-rookie opinion.

R

Re: Rosewood-yellow heart box

#5

Mike Stafford

Re: Rosewood-yellow heart box

Mike Stafford

>Pretty cool, John. My guess would be the natural oils in the rosewood interfered with the glue bond. Next time try wiping down the routed slots with acetone and letting it dry. Then glue your strips in and you should not have a problem. I like all of your routered boxes. Remind me of rose engine type work.

Re: Rosewood-yellow heart box

#6

Steven Antonucci

Love the top, but not wit that bottom, John

steve antonucci

>I'm with the other guys- I think I'd prefer to see something that was from rosewood and yellowheart on the bottom as well. Maybe you could match up the inlays with inlay on the bottom for a pinstrip effect?

The bottom shape also doesn't really do much for me either with that lid. Maybe a cylindrical box with the lid inset in the top?

2 cents doesn't buy much these days,

Steve

Re: Rosewood-yellow heart box

#7

Re: Rosewood-yellow heart box

Ron McKinley

>Nice work John. I like the combination......Ron

Re: Rosewood-yellow heart box

#8

Re: Love the top, but not wit that bottom, John

john lucas

>Steve I agree. The top doesn't go with the bottom Most of that was because I had to cut the top in half to get rid of the bad glue joints. Even then I'm not sure they would have flowed together like they should. I would have liked to have the bottom made out of the rosewood but I don't have any.