Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Ash trumpet bowl

Posts

Ash trumpet bowl

#1

Ash trumpet bowl

Bill MacLachlan

>This is my first attempt at embellishing a turning. Used some blue sand c/w 30 minute epoxy. Worked well except that sand was hard on the tools after it dried. Hadn't thought of that when I decided to use it. Learned something.

Finished with Min-Wax Wipe-on Poly and Beall buffed. Size = 8.5 x 5.

Critiques welcome.

Think my pictures are better as I took them outside, now that snow is all gone!!


img

Re: Ash trumpet bowl

#2

Re: Ash trumpet bowl

Scott Hurley in N. VA

>That's a beautiful piece. I like the inlaid sand, but I understand how rough it would be on your tools. I have fits getting Ash to come out smooth - to me it's like cottonwood - a distinct difference in hardness between the growth rings. I haven't been able to get an Ash piece really smooth - I can always feel the grain. Is there some trick (other than getting better with my tools) to getting Ash smooth? Thanks.

Scott

Re: Ash trumpet bowl

#3

Tool abuse

Terence Rice

>When I use turquoise or some other abrasive fill I first turn and rough sand then fill, and use 80 grit sandpaper to smooth the fill even with the wood.

Re: Ash trumpet bowl

#4

Re: Ash trumpet bowl

Allen Neighbors

>Very elegant bowl. It almost looks as if there is one inside another. Nice job, form and embellishment. :o)

Re: Ash trumpet bowl

#5

Re: Ash trumpet bowl

Bill MacLachlan

>Thanks Scott. I know what you mean about the smoothness. This bowl has the same problem. I think it will happen with any larger grain. The hard and softer woods will sanded at different rates.

Re: Ash trumpet bowl

#6

Re: Ash trumpet bowl

Bill MacLachlan

>Thanks for the comments.

Terence, the 80 grit gauge maybe the way to start the process.

Re: Ash trumpet bowl

#7

Re: Ash trumpet bowl

Jim Pugh, Elyria, OH

>This is response to Scott's question about sanding hard/soft wood like ash without getting serious changes in surface level. One of the suggestions that I saw recently - perhaps in one of the woodturning mags - was to use a stiffer sanding pad, held fairly flat to the surface and sand gently. The softer pads, especially when held at an angle to the work, want to cut the softer wood away.

Re: Ash trumpet bowl

#8

Re: Ash trumpet bowl *LINK*

Darrell Feltmate

>Bill

I like the bowl and the name "trumpet bowl." I will have to use that.


Around the Woods