Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Lathe housing

Posts

Lathe housing

#1

Lathe housing

dwr

>Here are the lathe housings and hood. Hood is hinged for access to the pulley and bearings. Housing has access on opposite side, to the motor and pulley. Remote control center in the background, full of Allen Bradley switches. Still needs some retrofitting for the controls to the vacuum pump.


img

Re: Lathe housing

#2

Re: Lathe housing

Jorge Castaneda

>You are doing a fine job on that lathe, I can hardly wait until you post pictures of it in action.

Thanks for sharing

Jorge

Re: Lathe housing

#3

Cool, I like it!

Eddie Pacheco, San Jose, Ca.

>That's going to be a sweet machine, Dave.

Re: Lathe housing

#4

Re: Lathe housing

dwr

>Thanks! You and me both, Jorge!

It will mean the culmination of a long and sometimes trying experience.

I am trying to collect copious pictures of the process and then do a write-up, mainly because I know how much I enjoyed reading other peoples exploits making something they felt was special and "their own." For instance, I am waiting patiently for the Rose Engine project that everyone was teased with recently..;)

With some hard work and a little some more blessings form the Lord, I hope to hit an early April launch... Stay tuned!

Dave

Re: Lathe housing

#5

Re: Cool, I like it!

dwr

>Thanks for the kind words, Eddie!

It's a one thing to have an idea and make some CAD drawings and another to commit to 1/2" Cold Rolled Steel plate! Mistakes are harder to fix or hide... and you can't exactly burn the failures... just the cash...;>)

Re: Lathe housing

#6

Re: Lathe housing

john lucas

>The rose engine project is up and running on the AAW site. I downloaded the stuff about a week ago. I'm enjoying watching your project. I've cobbled together a lathe but I'm slowly getting the tools to do one right. I don't have the need for it, I just think it would be fun to build one.

Re: Lathe housing

#7

Re: Lathe housing

Mike Cunningham (Cape May)

>Man that looks great! I've rebuilt/refurbished a few old machines but have yet to build one from scratch. I have three lathes but would love to try and do exactly what you're accomplishing. Good luck and I'm really looking forward to the pics and write-up you're planning.

Thanks for taking the time to post the pics!

Mike

Re: Lathe housing

#8

Re: Lathe housing

dwr

>John,

Thanks for the Rose Engine info!

I have a congenital spinal condition where my lower back and the rest of my spine are not connected with the little bones that connect each vertebra because they never developed. Found this out in my early 20's. Doctors wanted to fuse my back... no thanks! The condition it difficult to stay bent over a gap bed lathe for any length of time. Commercial bowl lathes were way out of my budget. So, I took a few years and am closing in on my home brewed lathe.

Thanks for following the progress, as any encouragement goes a long way!

Dave

Re: Lathe housing

#9

Re: Lathe housing

dwr

>Mike,

I an doing this just for you...;)

Thanks for the encouragement. I know a lot of people want to build a lathe but feel it is too difficult. It really is not that hard. Of course, the more skill sets you have (CAD, welding, etc) it will save you some money. But, as others have posted, you can make a functional lathe from railroad tracks. For me, motivation was based on medical needs.

The execution and design criterion was strictly me wanting it to look as nice as something you would spend a lot of money on as well as try my hand at a full-meal-deal, detail specific design, to prove to myself that I could do it to that level.

For those that lack certain skills, issuing RFQ's from other providers will get you some great deals. It has been a real life-saver for me on this project. I will detail all that I did when I write up the project. It will eventually end up on my soon to be finished website.

Thanks for watching Mike, I hope to be finished soon!

Dave

Re: Lathe housing

#10

Re: Lathe housing

Mike Cunningham (Cape May)

>Thanks Dave!

Re: Lathe housing

#11

Fantastic!

Dominic Greco in Richboro PA

>Dave,

I really loved seeing this lathe come together like this. I'm a Mechanical Engineer that specializes in Machine Design. So this kind of project is like meat and potatoes to me. And I understand the anxiety you must have felt when you first started "cutting metal".

Knowing that this is YOUR own design must really give you a great feeling. I know it would for me.

I can't wait to see the completed project. And especially the first time you fire this up and make some shavings!

See ya around,

Dominic

Re: Lathe housing

#12

Re: Fantastic!

dwr

>Dom,

You really hit the nail on the head... It is quite a leap of faith to take drawings that you sweat over for months, checking every detail, and then send them to the CNC Plasma cutter...

I have a video of the plasma cutter cutting out the 1/2 CRS panels... pretty cool!

All my panels were within 1/32"... before the first welder got hold of them... one of the disappointments and lessons that come from trusting people you don't know, to do the same quality of work you would do on YOUR "baby."