Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Bandsawing wood article (minor gloat)

Posts

Bandsawing wood article (minor gloat)

#1

Bandsawing wood article (minor gloat)

Brian Hahn in SW Wisconsin

>The current issue of Wood magazine (May 2007) has an interesting article on cutting up logs for turning blanks and lumber. Joe Hurst-Wajszczuk wrote the article, but the pictures were taken at my place, so you get to see a little of how I do things and get a few peeks at my shop.

And you might notice that my turning tools are stored point up.

Re: Bandsawing wood article (minor gloat)

#2

Re: Bandsawing wood article (minor gloat)

Cyril Griesbach

>Brian, I read that article with great interest. Not just because you were featured but because of the wealth of information provided. Congratulations and nicely done.

Cyril

Re: Bandsawing wood article (minor gloat)

#3

Re: Bandsawing wood article (minor gloat)

john lucas

>I read it last week but looked it over again today. Nice shop. I've always wondered if there was a dissadvantage with keeping the buffing wheels out in the open. I keep mine in a drawer but I don't know if it keeps all that much dust off of them.

Re: Bandsawing wood article (minor gloat)

#4

Buffing wheel storage

Brian Hahn in SW Wisconsin

>John,

The dust and chips fly off when the wheel first spins up. Besides all of my drawer space is over-committed right now.

Re: Bandsawing wood article (minor gloat)

#5

Re: Buffing wheel storage

Allen Neighbors

>I keep my wheels in one of those large, flat, plastic storage bins, right next to the motor. I used duct tape to hinge the lid. It works, and they stay fairly dustless.


img