Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

It's Alive!!!

Posts

It's Alive!!!

#1

It's Alive!!!

dwr

>Nearly two years of planning and another step closer. My friend, John, just got the bowl lathe I am building, onto the power grid!

5hp - 60Hz of pure Tim Allen "More Power" at my fingertips! We still have to wire the remote station, but just knowing that my eBay specials were not DOA's makes my day... makes my year so far!

Some more machine work, a little more welding and off to the powder coaters! Hope to have it ready for a test drive in about 4 weeks if all goes as well as today. If I can get the kinks worked out and complete the assembly in time for the AAW coming to town, I might have to throw a party...;)

Dave - smiling from ear to ear in the NW


img

Re: It's Alive!!!

#2

Brains...

dwr

>... of the lathe... A TB Woods VFD ($1,500 retail) scored off eBay for $199... new!


img

Re: It's Alive!!!

#3

Brains behind the brains...

dwr

>... My good friend, John, doing his magic...:)


img

Re: It's Alive!!!

#4

Where did you get the Poly-V pulleys?

Eddie Pacheco, San Jose, Ca.

>I'm in the process of converting an old PW-90 to a 2 hp VFD. I have the motor and drive, but haven't located a source for the Poly-V pulleys. I have the groove specs for creating some drawings to get to a machine shop, but I would rather purchase off the shelf parts. A lot of the Polly-V sources were in Europe. I know that Applied Technology Solutions is a source. The Goodyear and Gates sites were a pain to get pulley info out of. If you got yours from a supplier please let me know the source.

BTW The lathe looks like it's going to be a monster. Nice job.

Re: It's Alive!!!

#5

Re: Where did you get the Poly-V pulleys?

dwr

>Eddie,

I had them custom made by a machine shop. There are no Poly-V belt pulleys readily available. I went through the same thing you did with Gates and Goodyear. I drew up the CAD files and and had the shop make them out of 6061 aluminum. Send me an e-mail with where you are in your process.

The lathe will have a 96" capacity... not that I have the @@ for that size!

Dave

Re: It's Alive!!!

#6

Spindle

dwr

>2.25" x 19" of ground 4140 steel with 1.25" x 8 tpi threads on both ends. Through hole for vacuum chucking.


img

Re: It's Alive!!!

#7

Would you mind saying where the bearings are from?

Gil Jones, Lake Seminole, GA

>

Re: It's Alive!!!

#8

I'll be at your place the Wednesday before

Doug Thompson near Cleveland

>the symposium. I plan to fly in Tuesday then drive to your place the next day. This lathe has to be done. Start to make plans.

Dave, you made progress since the last time we talked... keep up the good work

Re: It's Alive!!!

#9

Ebay...

dwr

>... about 40+ pounds each... nasty big things....

Re: It's Alive!!!

#10

Hey, Dougmeister...

dwr

>... looking forward to your visit!

Today was a red letter day! All the work on the lathe was centered around these two pieces working... and do they ever! What a trip to have this thing run, dynamic break and then charge into reverse... all in about 3 seconds! Don't know who was more excited, me or John... both had stupid grins on our faces... just as my wife pulled up from work... typical Tim the Tool Man Taylor moment...;)

Been deliberately silent for a long time, because progress was slow and building to this point, so a lot of pent-up energy waiting to be released...

Will finish the remote station next week. Then some minor metal work and off to the powder coaters... for a three part Candy Red Granite paint job inside and out...

The custom tail stock is almost done, 90% of my custom tool rest is finished, some re-machining for the motor lift and other odds and ends and all the parts will be ready for a maiden voyage. Only thing missing is better tools, wonder where I can get some? (Better go to bed... too much gloating and the whole multi-year project will blow up in my face...)

I will snap a picture of two Maple log halves dropped off by a friend from Spokane... huge sucka's... but need to start a bit smaller until my testosterone levels catch up with the lathe...;)

Dave

Re: It's Alive!!!

#11

Re: Hey, Dougmeister...

Doug Thompson near Cleveland

>Dave, I can't wait to see the banjo/tool rest you designed. With your three step pulley coupled with a huge motor you could turn any size log. It just so happens a lenght of 3/4 inch steel was ordered to make a Texas size bowl gouge and as a novelty I will make a 1 inch diameter bowl gouge... LoL this will open some eyes. BUT there is a man in Texas who wants a huge bowl gouge so I'll let him try it.

Re: It's Alive!!!

#12

Re: Hey, Dougmeister...

dwr

>Doug,

I think the tool rest will surprise a lot of poeple... Bring your tools with you, if you can get them on the plane...:)

Dave

Re: It's Alive!!!

#13

Re: Hey, Dougmeister...

Doug Thompson near Cleveland

>Dave, you don't know it yet but I'm shipping a bunch to your address before the symposium. If you don't mind that is.

Re: It's Alive!!!

#14

Re: Hey, Dougmeister...

dwr

>Doug,

Not a problem! Anything to help you out!

Dave

Re: It's Alive!!!

#15

Re: Hey, Dougmeister...

Jorge Castaneda

>In a monster lathe with a monster log spinning I would not use anything but a heavy bar with a 1/4" cutter or even a 3/16" until the piece is balanced.

But that is jus me...

Jorge

Re: It's Alive!!!

#16

Re: Ebay...

Gil Jones, Lake Seminole, GA

>Thanks, is there an address for the seller.

I also have a 5hp motor for a homemade lathe.

Gil

Re: It's Alive!!!

#17

Re: Ebay...

Rick in Colgate, Wi

>Hi Gil,

If your interested I have a pair of Dodge pillow blocks with a 2" bore, unused but one has a little rust on it. $20 plus shipping for the pair, I picked them up to make a lathe but lost interest in the idea.

Rick

Re: It's Alive!!!

#18

Gil... this is a good...

dwr

>... deal on Dodge 2" bore bearings, especially an unused pair. Mine fit in the USPS $8+ Flat Rate Box... so shipping was a bargain.

Dave

Re: It's Alive!!!

#19

Re: Ebay...

dwr

>Rick,

If Gil does not want them, shoot me some pictures and part numbers and I might be interested...

Dave

Re: It's Alive!!!

#20

Is this for the second Lathe?

Doug Thompson near Cleveland

>

Re: It's Alive!!!

#21

Re: Is this for the second Lathe?

dwr

>I have a couple of design changes (... happens when you have a couple hundred CAD files developed during a multi-year process...) and improvements that I might want to try down the road, so I am considering stock-piling components for a future version. Also, I have been asked if I would be willing to make any more, so if I get a wild hair, you never know...

So, what size blanks do you need to turn a hat...;)

Dave

Re: It's Alive!!!

#22

Re: Is this for the second Lathe?

Doug Thompson near Cleveland

>I need to applaud the effort you put into this project. Most of us only dream about making a lathe and your almost done. My hat is off to you.

Re: It's Alive!!!

#23

16" dia X 16" makes 2, fresh cut, green.

Doug Thompson near Cleveland

>

Re: It's Alive!!!

#24

Will do!

Rick in Colgate, Wi

>