Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

jet lathe stand

Posts

jet lathe stand

#1

jet lathe stand

Pat Schupbach

>I am looking to build a wooden base for my jet lathe(full size) Does anyone have plans/photos? Your input would be great. Thank You.

Re: jet lathe stand

#2

Re: jet lathe stand

Joe in a Cleveland suburb

>Look at THIS post from the other day over on the regular message board.

Also, if you do search here you will probably find a lot of info. I know I've asked this question before too. Just haven't built anything yet!

Good luck,

Joe

Re: jet lathe stand

#3

Re: jet lathe stand

Pat Schupbach

>My lathe is JWL-1236 full size. I dont like the metal A-frame style base. I guess I could take that idea and enlarge it. Thanks for the response.

Re: jet lathe stand

#4

Re: jet lathe stand

rj anema

>Dominic Greco has posted a great picture and even the dimensions of a base for a 1642 I think it was. I modified it for a 1442 and it works great. It's primary purpose is a box to put sand bags into to stabilize the lathe but the top of the box is a great place to put tools etc. as long as you don't loose them in the shavings. It could also easily be modified for a 1236 or whatever that model is. Sorry, but I could not find the exact reference but maybe someone else who is more search savy can help.

Rich

Re: jet lathe stand

#5

Re: jet lathe stand

Ed Larson

>Pat

I made a post on March 8th titled Modification to Jet 1236.. It describes the modification and stand I built for my Jet 1236. E-Mail me if you have any questions or want to discuss further.

Ed