Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

3-D Bottle Stopper

Posts

3-D Bottle Stopper

#1

3-D Bottle Stopper

Bobby

>My first attempt at turninng one of Ed "YoYoSpin" Davidson acrylic stoppers. Came out pretty good. Started out chipping pretty bad but got that under control and it was smooth turning afterward. Got the base a little smaller than I wanted, but it works. Naturally the wife, who likes yellow roses, laid claim to it as soon as I showed her.

Wet sanded to 1200 and then polished it with some acrylic polish. It shined up real nice I think. It will be on my list to do some more.

Bobby

Louisiana


img

Re: 3-D Bottle Stopper

#2

Re: 3-D Bottle Stopper

Ruth Niles

>That's really pretty and you did a great job. I'm getting some of the EPRs from Ed and now I can't wait to try them. You said they chipped in the beginning, what tool do you use? Can you use a skew in the cutting position rather than as a scraper? I ask because on Ed's tutorial video he only shows scraping the resin.

Re: 3-D Bottle Stopper

#3

Re: 3-D Bottle Stopper

Brian Hahn in SW Wisconsin

>Ruth,

I don't do bottle stoppers, but I have turned a bit of polyester resin. Unlike wood, it doesn't have any grain. So a skew doesn't have any real advantage over a scraper. The most important thing I found was to take it slow and easy. It really liked to chip when I was aggressively removing material.

Re: 3-D Bottle Stopper

#4

Re: 3-D Bottle Stopper

onewaywood

>That looks great. I'm jealous -- the only thing I would have done different is use one of

those fabulous stopper bottoms from the famous celebrity Ruth Niles.

Re: 3-D Bottle Stopper

#5

Thanks, Brian

Ruth Niles

>I'll let you know how I make out with the resin stoppers. Ed Davidson has a great thing going!

Re: 3-D Bottle Stopper

#6

Re: 3-D Bottle Stopper

Bobby

>Hello Ruth,

I started out using a round nose scraper but it chipped too bad. I then started using the skew, which is my least favorite tool. It takes a little longer but the results are worth it.

Bobby