Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Buckeye Hollow Form

Posts

Buckeye Hollow Form

#1

Buckeye Hollow Form

Bill Clark

>I finally advanced to the point I'm starting hollow form vessels. I just purchased a new Don Pencil set up and have been giving it a good tryout. This is my second attempt. It's Calif. Buckeye cut from a large burl I purchased a few weeks ago. The vessel is about 4" wide, 3 1/2" tall. The opening is 1 5/8" and the walls are about 1/8" thick. The black color is quite impressive.


img

Re: Buckeye Hollow Form

#2

Natural Edge Buckeye

Bill Clark

>After turning the hollow form I tried my first natural edge bowl. It's also Calif. Buckeye. It stands about 5" high. Although it's hard to see the hole in the side, it starts about 1 1/2" from the base and runs all the way to the top. I left the walls 1/4" thick to preserve some of the natural edge details.


img

Re: Buckeye Hollow Form

#3

Re: Buckeye Hollow Form

N_Addy

>Bill, that's only your 2nd HF? That's gorgeous! You've got a good eye for form.

I also just got the Don Pencil set a week ago. So far I'm loving it. Let us know what you think!

Re: Buckeye Hollow Form

#4

Re: Buckeye Hollow Form

Bill MacLachlan

>Both pieces are great Bill. I like the color of the second one, especially with the contrasting knots. The natural edge looks like it could have been a knuckle breaker!!

Re: Buckeye Hollow Form

#5

Re: Buckeye Hollow Form

Bill Clark

>You�re correct about it being a knuckle breaker. I had to be very careful while finishing the inside. The piece was so small inside I could not power sand anything and I had to do it by hand. Power sanding would have produced a more uniform finish inside. Fortunately the outside finished up very well.