Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

how to use beading tool

Posts

how to use beading tool

#1

how to use beading tool

Steven in the Iron Range

>Can anyone explain or point me in the right direction on the proper way to use a beading tool. I've been cutting straight in and rocking it from side to side, but it seems slow. The tool is sharp. Am I missing something?

Re: how to use beading tool

#2

Re: how to use beading tool

john lucas

>Steven I only have a homemade beading tool which I rarely use. I use it by starting below center and lowering the handle to start the cut. Raising the beading tool through the cut lets the sides cut more like a cutting tool instead of a scraper because they angle into the wood.

Re: how to use beading tool

#3

Re: how to use beading tool

Nick Stagg

>Steven,

Next to a spindle and bowl gouge, the beading tool is my tool of choice. I cut tenons with it, shape the outside of boxes and use it for all kinds of detail work.

You didn't say what size yours was or what application you were trying to acomplish. Some more information would help.

Nick

Re: how to use beading tool

#4

Re: how to use beading tool

Fred in NC

>I have always used them as scrappers. Tool post a bit higher than usual, and the tool pointing down at an angle. I use small beading tools, 1/16", 3/32", 1/8", that I make, (penturners use my bits) and also larger commercial ones. With the smallest ones, I do not have to sand the beads.