Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

A lurker no more

Posts

A lurker no more

#1

A lurker no more

C.W.Stivison

>This is my first turning since I started in January that I didn't destroy before it was finsihed.I know it leaves some to be desired but I think my turning although not the best it is alot better than my photo skills.I am sure when John Lucas or Jammie see this picture it will be like someone running their nails across a chalk board. At my age I can only learn one thing at a time and now I'm tring to learn to turn. It is 1.25 by 5", made from cherry and finished with tung oil. Comments welcome on turning only.

C.W.


img

Re: A lurker no more

#2

Re: Nothin' major wrong here......

Jamie Donaldson

>... except the camera angle- too high to show anything about the profile. Just lower the camera some and you're a star!!

Re: A lurker no more

#3

Nothing wrong with

Ruth Niles

>the bowl, either. Very nice orientation of the grain. Looks almost exactly like the set I turned last month, except the bottom was tucked under a wee bit more as another poster suggested.

Re: A lurker no more

#4

Re: Nothin' major wrong here......

john lucas

>Looks like you got Jamie and I both. A clear sharp photo is good. I'll agree with Jamie the angle is too high. I shoot bowls mostly from 10 to 45 degrees above the table depending on whether the form, or what's inside is the most important. Glad your posting. We look forward to seeing more work.