Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Making a vacuum pump from a compressor

Posts

Making a vacuum pump from a compressor

#1

Making a vacuum pump from a compressor

Gary Evans Tallassee, TN

>Hi all,

I was hoping someone else would post a new message so that I wouldn't have two up in a row, but I have to go do other things now and I wanted to get this question out there.

I have access to a number of old refrigeration cases, some of which still operate. I plan to strip out one of the good compressors to use as a vacuum pump. Anything in particular that I need to look for in choosing my target? Anything I'll need to take out besides the compressor and the main contactor?

Has anybody seen instructions on line for this type conversion?

Thanks,

Gary

Re: Making a vacuum pump from a compressor

#2

Jesper, Denmark

Do not do this - see why in Messages

Jesper, Denmark

>

Re: Making a vacuum pump from a compressor

#3

Re: Do not do this - see why in Messages

Gary Evans Tallassee, TN

>Jesper,

Not to worry. I worked for years in auto AC and understand the ins and outs of freon and greenhouse gases. If I do this, rest assured that it will be done in an environmentally responsible manner.

Thanks,

Gary

Re: Making a vacuum pump from a compressor

#4

Re: Making a vacuum pump from a compressor

Mark Mandell - Gone Round In Jersey

>Gary, see my post on the Messages board.

Re: Making a vacuum pump from a compressor

#5

Re: Making a vacuum pump from a compressor

Tom Wilson

>I use an old freezer compressor for a vacuum pump, having gotten the idea from an old issue of Woodworker's Journal. the only thing I had to do was identify the suction and discharge tubes, one other tube came out that had to be pinched shut. The hardest part for me was finding a way to attach the plastic tubing to the vacuum port. Finally found a fitting from a oxygen breather my brother uses that would fit tight on the tube.