Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

A simple mahogany bowl

Posts

A simple mahogany bowl

#1

Barb Siddiqui

A simple mahogany bowl

Barb Siddiqui

>Shot a few pix of a simple mahogany bowl, only my third try on the mini-lathe. I had a lot of trouble learning to cut and to sand this kiln-dried mahogany, but finally managed. Oiled, waxed and buffed, it is 8-1/2" x 2-3/4" h. Any suggestions or comments are welcome.


img

Re: A simple mahogany bowl

#2

Barb Siddiqui

Profile View 

Barb Siddiqui

>


img

Re: A simple mahogany bowl

#3

Barb Siddiqui

and a concave bottom.... 

Barb Siddiqui

>


img

Re: A simple mahogany bowl

#4

Re: A simple mahogany bowl

Jimmy Edwards

>Your 3rd mahogany bowl is prettier than my 3rd mahogany bowl.

Re: A simple mahogany bowl

#5

Re: A simple mahogany bowl

Russ Fairfield

>Looks good from here, Barb. Mahogany is notorious for end-grain tear out and sanding scratches. Did you get all of them? U can't see any.

Re: A simple mahogany bowl

#6

Barb Siddiqui

Thanks Russ

Barb Siddiqui

>I concentrated heavily on the interior, and the wet-oil sanding took care of it; I missed a bit on the outside, behind the top cove, but it isn't too noticeable with the oil treatment. I learned a lot working on this thing.

Re: A simple mahogany bowl

#7

Barb Siddiqui

:-) Thanks.

Barb Siddiqui

>

Re: A simple mahogany bowl

#8

Re: A simple mahogany bowl

Carol from AZ

>Very nice, my friend. Very nice.

Re: A simple mahogany bowl

#9

Barb Siddiqui

Are you turning?

Barb Siddiqui

>

Re: A simple mahogany bowl

#10

Re: Are you turning?

Carol from AZ

>I will be re-united with my lathe by the end of May!

I am counting the days. I have some nifty blanks I have been gathering up...