WE'VE MOVED TO A NEW SERVER
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

3-Jaw Machinist Chuck.....

Posts

3-Jaw Machinist Chuck.....

#1

3-Jaw Machinist Chuck.....

Wally Dickerman in Arizona

>You newer turners (10 years or less) probably don't realize it but before around 1990 the 4-jaw scroll chuck that's so popular today didn't exist. Before that there were collet chucks and the 3-jaw machinist chuck adapted for wood lathes. Also, turners used a lot of jam-fit chucks and just plain faceplates.

My 3-jaw chuck is well over 25 years old and has been adapted to different sized threads 3 times. I still use it occasionally and wouldn't be without it. The jaws are reversible. It'll hold a 6-1/2 blank while I true up the bottom for a glue block or chuck. It'll hold spindles of most any size where a tailsock isn't wanted or needed. In fact it'll hold just about anything that's round and is between 1/4-inch and 6-1/2 inches in dia.

Surprisingly, Grizzly still sells them for about $85. It's big and heavy and solid, and very handy to have. I recommend it.

Be aware that when opened wide the jaws are real knuckle-busters. I speak from experience.

Wally

Re: 3-Jaw Machinist Chuck.....

#2

Re: 3-Jaw Machinist Chuck.....

Wally Dickerman in Arizona

>When you've been turning for 70 years, a turner who's been turning for only 10 years is a newbie...

Wally

Re: 3-Jaw Machinist Chuck.....

#3

Re: 3-Jaw Machinist Chuck.....

georgetroy

>Turner here for 25 years, you sure got me beat Wally. I let my 3 Jaw chuck go with a Delta lathe I sold to a lady, that was stupid of me. It was a Craft Supplies chuck from the mid 80's made in China. GT

Re: 3-Jaw Machinist Chuck.....

#4

Re: 3-Jaw Machinist Chuck.....

Ken Grunke from SW WI

>I have graduated from novice to intermediate with 19 years or so of turning.

I have 3-jaw and a 4-jaw hobbiest chucks made by AMT probably 30 years ago. They were the cheap brand back then, but are pretty high-grade stuff compared to today's imported crap. They do come in handy once in a while, when nothing else will do.

Re: 3-Jaw Machinist Chuck.....

#5

Re: 3-Jaw Machinist Chuck.....

George Van

>Newbee here Wally! Hope I live long enough to advance :-))

Re: 3-Jaw Machinist Chuck.....

#6

Re: 3-Jaw Machinist Chuck.....

Brian Hahn in SW Wisconsin

>I started out with a carbon steel tool set from AMT. A couple of the tools weren't even hardened. High speed steel is a big, big improvement.

Re: 3-Jaw Machinist Chuck.....

#7

Re: 3-Jaw Machinist Chuck.....

Bill Crommett

>My first lathe was a model B Shopsmith with a set of high carbon tools that I still use on occasion. I think the high carbon tools can take a sharper edge, but won't hold the edge as long. Model B shopsmith was along about 1952 or 1953.

Re: 3-Jaw Machinist Chuck.....

#8

Re: 3-Jaw Machinist Chuck.....

Allen Neighbors

>Wally, I'm a newbie. With a 3-jaw Machinist Chuck from Grizzly. (That was before I got my SN2s.) I lost so many pieces from it, I used my Dremel and a cut-off blade to deepen and sharpen the teeth on the long side. It works well now, but I seldom use it. :o)

Re: 3-Jaw Machinist Chuck.....

#9

Re: 3-Jaw Machinist Chuck.....

Gary Evans Tallassee, TN

>Another advantage to the machinist chuck is that the weight provides some flywheel effect on an underpowered lathe. Lets you take a little deeper cut before you stall out the motor.

Gary