Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Rubber could finally meet the road

Posts

Rubber could finally meet the road

#1

Rubber could finally meet the road

David Breth

>It has been a little while since I posted anything - been busy. But, I'm still hanging around WC and still "going for a spin" in the shop when conditions permit.

This week at work we are having a Chinese auction to assist with the financial situation of one of our employees who has stage four cancer. The cafeteria is full of baked goods, chili for lunch, and items for the Chinese auction. I have never seen so much "stuff" contributed for such an event. The business has offered to match the money raised up to some amount. Its nice to see.

I contributed a little cherry bowl that I made from wood I acquired in the fall, when land was cleared for our new parking lot. It is a decent little platter-ish bowl, but nothing to get super-excited about, it just happens to be the only bowl I've done so far from that wood. The response to it has surprised me. I've had a few people comment that they will be very disappointed if they don't win it, etc., and it has been suggested that I better be ready to take orders.

Oh boy. Now I'm in trouble. Ordinarily I don't believe that sort of talk, but I'm hearing it enough it I kind of think there will be a handful of people who seek me out. I've never sold a bowl or anything I've made. Ever. I've been thinking about doing a local craft show in June, and started thinking about pricing somewhat, but now I have a very real possibility of people actually making inquiry, and I kind of think I should have answers for them.

There's nothing incredible about my work. When a friend comments on my bowls, I invariably tell them "you should see what people who know what they're doing can make." My stuff is pretty basic, the woods tyically aren't anything remotely exotic, I just try to do a good job with each, believe that I do, and have certainly improved over time. I think I'm in the $20 - $40 range with my stuff, but boy I just don't know. Its easy and fun to give the stuff away. I guess the answer is price to the best of my ability, assessing the intrinsic value of my work, the use of wood that came from our mutual place of work, and true interest within this fairly limited market, bearing in mind that my effort is worth a little something. Piece of cake.

Speaking of cake, there is so much cake back there you can't believe it, and like Anita Bryant said, "its not just for breakfast anymore". Maybe I'll go back there and just have a little.......something.

If I think of it, I'll post a photo of the bowl that's getting all the buzz.

David B.

Re: Rubber could finally meet the road

#2

Barb Siddiqui

Re: Rubber could finally meet the road

Barb Siddiqui

>Congrats, David- I heard from a seasoned professional that donating to auctions and causes like that is one of the very best methods of exposure for one's work. A little scary, but pretty exciting! I hope it all comes true. Be careful not to underprice...or you'll be swamped with requests and have no time to fill them with quality work. Good luck.

Re: Rubber could finally meet the road

#3

Re: Rubber could finally meet the road

Bob Fawcett

>As Barb said don't underprice.

Whats your time worth. If you make $25/hour in your real job, then your time at the lathe is worth at least that as well. If it took 3 hours to make the bowl, its a $75 bowl or more.

I have never sold anything either, and don't really plan to start. I will follow this with interest.

Re: Rubber could finally meet the road

#4

Re: Rubber could finally meet the road

Jim Swank

>In this particular case, people will be expecting to pay about what this piece raises for similar work. If that's enough to satisfy you, life is simple. If you want more, your first response should be along the lines of "Normally I'd price it around $xx.00, but I figured I'd donate this one to a good cause."

Rather than take orders, take a list of potential buyers. Bring in up to 3 pieces when you have some done, and offer choice at your price going down the list. That's far less pressure than trying to make one piece to suit one customer, and it offers an out for a co-worker who may have changed their mind.

Re: Rubber could finally meet the road

#5

Re: Rubber could finally meet the road

David Breth

>Thanks very much for the suggestions to all, and particularly your suggestion about making a "lot" rather than trying to be specific to one person. That does take the pressure off, and does give somebody an out if needed. I wouldn't want to make something for somebody and not have them be turned on by it.

David B.