Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Grizzley Lathe

Posts

Grizzley Lathe

#1

Grizzley Lathe

John Bussom

>Anyone using G0584 lathe from Grizzley???

Not that I am real fond of their products as I have had to fix most anything I purchased there but they are close and the price is closer to my hobby budget!

John

Re: Grizzley Lathe

#2

Re: Grizzley Lathe

Ralph

>I don't have one. When I was looking I rejected this one as I thought the low-end speed was too high for bowls and the high-end speed was too low for pens and bobbins

Re: Grizzley Lathe

#3

Re: Grizzley Lathe

Phil Joines Krum, TX

>I don't like the 1 x 12 spindle thread. It's hard to get accessories for it. 1 x 8 is standard.

Re: Grizzley Lathe

#4

Re: Grizzley Lathe

John Bussom

>Thanks Ralph and Phil,

Appreciate your input, these are things I overlooked, pays to ask questions, guess I will look around somemore.

Maybe need to replace the bearings in that old Atlas and use it another season, wasn't happy with it last time I used it and thought it was time to look at something not 50 years old!

John

Re: Grizzley Lathe

#5

Re: Grizzly Lathe

Ray Carson in Lawrenceville, NJ

>Hello John,

For twenty dollars more you can get the Grizzly G0462. More HP, has the 1 x 8, more weight, digital readout......

I have a G0462 and have only turned a few items. I'm happy so far. I agree that Grizzly may not be top dog, but I'm also a budget minded hobbyist such as yourself and Grizzly tools fit my needs quite well.

Just my 2 cents worth ,

Ray

Re: Grizzley Lathe

#6

Whoops, wrong lathe

John Bussom

>Thanks Ray, actually the lathe you have is the one I was looking at, I was really wondering about the differences between the two in respect to $20 difference in price.

Excuse the senior moment!

I think the last time I looked at these my """"self"" comments were something like "this is a real brainer" digital readout? 2" more OTB?

VS or fixed speeds. I am not really concerned about the high speed of the lathe cause if I do turn pens or stoppers I do them on the Griz Mini Variable which has me spoiled with being able to go really low on the 0 RPM up to faster than I need or want to go.

I live too close to the Pa Grizzly showroom, so I end up buying most ww tools from them! Looks like another stop before making any decisions! Glad to hear you are happy with yours!

John