Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Streamline Pens, pic

Posts

Streamline Pens, pic

#1

Streamline Pens, pic

Jim Shaver Oakville, Ont.

>Hi,

One of my frustrations as a pen maker has been finding a pen in the 7mm slim line category that I think suits my style of pen making. I know many people like the traditional slim line but I have not found it to my liking.

As a seller of my work I have also seen the need for a slim pen that looks just right. I think I have finally found the kit that works for me. A few weeks ago I was in the Burlington Lee Valley and I noticed a pen kit called the Streamline. I had not seen it before and I liked the look.

With a show coming in a week I bought 10 kits and decided I will see how they do.

So here is the result of today�s turning.

These are Flat Top Streamlines

[Photo Sharing and Video Hosting at Photobucket

They are all stabilized box elder burls, spalted, red, black, green and brown

These are the Round Top Streamlines,

Photo Sharing and Video Hosting at Photobucket

They are a variety of colours of stabilized box elder burls and a spalted oak.

I am really happy with the size and appearance of these pens, I think they will do well

Take care,

Jim

Re: Streamline Pens, pic

#2

Re: Streamline Pens, pic

Jim Terry

>Jim, These look great. I believe you will find them well accepted.

It appears the nib in this kit has a longer taper than most which

allows a better transition.

Jim Terry

Re: Streamline Pens, pic

#3

Nice looking pens young man.

Dave Smith, Longview, WA

>Hi Jim,

The streamline is my favorite pen kit. Very versatile and the increased diameter shows off the wood better than slimlines.

Also, I have replaced the center band with contrasting wood for different look.

It is always a treat to see your pens. Thank for posting the pictures.

Dave Smith

Baby sitting a couple grandchildren, no pen turning tonight in Longview, WA.

Re: Streamline Pens, pic

#4

Re: Streamline Pens, pic

Jennifer@Indy.USA

>OOooooo....me likey these too! I think I like the round top ones best...but they are all stunning....as is to be expected from the "Mr. Shaver Collection".

:)

Re: Streamline Pens, pic

#5

Re: Streamline Pens, pic

eaglesc

>They look like a beefier slimline which is good, do they come in the better platings?

Re: Streamline Pens, pic

#6

Re: Streamline Pens, pic

Steve Kujawa

>I also like these pens VERY NICE! - What did you think about the Platings and the fit?

Re: Streamline Pens, pic

#7

Re: Streamline Pens, pic

Jim Shaver Oakville, Ont.

>Thanks All,

I like the heavier than slim aspect of these pens but that they fill a niche of a slim pen that I did not have in my show trays before...I am excited about that.

Thanks for your kind words all.

Eagle this is the chrome plate version, the other option at Lee Valley is a gold plate.

The round top has a longer lower barrel than the flat top and the clip looks nicer to me as well than the flat top. I like the fit of the hardware very much, these are nice hardware kits.

Take care,

Jim

Re: Streamline Pens, pic

#8

Am I in a rut??

Bill Howatt

>This has been bothering me for some time so I'm going to ask under Jim's pen thread - this will ensure that we are strictly speaking of shapes not other aspects of quality which are always tops.

My rut seems to be that I don't like non-traditional pen shapes! I have in my head that pens are bigger at the top and within reason taper to the point. I just don't care for the "hour-glass" waist or other funny curves in the lower part of the body.

I have a feeling that I am not in the popular camp because people who sell pens wouldn't be making them this way if nobody bought them.

Am I really all alone in my opinion?

Thanks,

Bill

Re: Streamline Pens, pic

#9

Re: Streamline Pens, pic

Wayne Allen - Carson City. Nevada

>Jim -- I also agree with your thoughts about the traditional slim line pens. I found that if you use a larger center bushing (say the size of the "Sing" bushing) and use this bushing to turn the shape of the pen. After shaping the pen, remove that bushing and replace it with the smaller slim line bushing and then turn a gentle rouunded edge on the sharp edges of the center. Use the standard center band or one of the decorative bands sold a Woodcraft. This gives a heftier more comfortable pen at the same cost of the inexpensive Slim Line.

Re: Streamline Pens, pic

#10

Re: Am I in a rut??

jeff myroup

>Bill,

You are not alone. There are shapes that I really like and shapes that I don't. This is not only pertaining to pens, but all turnings in general. I can appreciate a form but not really like it. I too get in a rut turning the same shapes over and over. I have to really force myself to turn something new. If I just chuck up a blank, the same shape appears when I am done. I think in my case, it is because I am still relatively new to turning, with no real contact with other turners. I still lack the creativity to explore new shapes, and thus revert to what I know is pleasing to my eye. I am currently exploring turning and woodworking clubs to get some better exposure. I am also a very logical person, so a pleasing shape to me has very definite proportions. I don't consider myself very artistic or creative, so I think that might hinder me as well.

Jeff

Re: Streamline Pens, pic

#11

Re: Streamline Pens, pic

jeff myroup

>Jim,

Nice job on these. I really like the flat top version.

On a side note, I was in Milton visiting my in-laws, about a month ago. My father in-law swore there was a Lee Valley in the area. We spent 3 days looking for it, off and on. We finally found it on the third day. It was Sunday, It was closed! Maybe next time.

Jeff

Re: Streamline Pens, pic

#12

Re: Streamline Pens, pic

Jim Shaver Oakville, Ont.

>Hi Jeff,

Next time drop me a line.....The LV is in Burlington, just off the 403 at Guelph Line....a stones throw away is Exotic Hardwoods...you can make a day of it!

LoL

take care,

Jim

Re: Streamline Pens, pic

#13

Re: Am I in a rut??

Jim Shaver Oakville, Ont.

>Hi Bill,

No you are perfectly right about shapes that apeal to you. I am not even sure I like these as much now that I look at the pictures, some are better than others...

I think we see what we like in design all around us, bringing it into our hobby is a challenge at times...taking time to step back and knowing when to do so often adds some fresh air and thoughts... even a rut can be a feature in the right place.

:-)

take care,

Jim

Re: Streamline Pens, pic

#14

Re: Streamline Pens, pic

jeff myroup

>Jim,

I will certainly do that.

Jeff

Re: Streamline Pens, pic

#15

Re: Am I in a rut??

Bill Howatt

>Hi Jim,

What sort of comments do you get from the buying public concerning the less-traditional shapes? Do you get many comments like mine or do people like something different, or does the fact that perhaps a non-traditional shape feels better when holding the pen, or ...

Like I said earlier there has to be appeal with the different shapes because you and other penturners produce them for sale. I admit that the extra curviness can reinforce the decorative patterns in the body stock.

Thanks,

Bill

Re: Streamline Pens, pic

#16

I have the same feeling...

keith zimmerman, Normal IL

>I find that I really am not a fan of the "pinched waist" look in the slimline either. I tend to turn my slimlines with a straight upper section with a slight scallion shape above the nib. Sometimes, I like to make both shafts thicker with a rolled over edge at the center band. When I say thicker, I'm saying maybe 1/32 thicker. Not enough to make it look like it has a "pinched waste". My customers seem to like this shape too.

BTW, I really like these pens that Jim is showing. Thanks for posting them.

keithz

Re: Streamline Pens, pic

#17

What I know

Jim Shaver Oakville, Ont.

>Hi Bill,

I have turned both bushing to bushing pens and ones like you see....I honestly can not tell if one will sell over another on that characteristic all things being equal.

I do know that on my larger pens that the curve I turn fits the arch of the finger of the writer, a lot of people comment that they like that...

Just what I know.

Take care,

Jim