Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Spindle turning techniques

Posts

Spindle turning techniques

#1

Keith Tompkins

Spindle turning techniques

keith tompkins

>Here's another page from my finial demo handout. This one shows the technique I've developed to turn finials. It's based on traditional methods. Note that I use the detail gouge right on the center-line of the turning with the flute facing away from the cut... this way, I eliminate the excessive motions associated with spindle turning...everything happens on one plane. This method eliminates raising the tool handle while rolling the tool in the direction of the cut....a difficult task to master. I believe a successful spindle turning has a large contrast in diameters....the contrast of large diameter to small adds a great deal of interest to a turning. In the image, note the size of the bead in comparison to the cove, and the effect it has on the form.By turning this way, the tool rest doen't interfere with creating any shape the turner desires, as it does with a high rest. With the rest set high-up on a turning, the handle must be raised uncomfortably high in order to create smaller diameters within a turning. This technique works well with the skew as well!


img

Re: Spindle turning techniques

#2

Re: Spindle turning techniques

George Van

>Thanks for the tip Keith, I will give it a try in the morning!