Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Grinder question

Posts

Grinder question

#1

Grinder question

Edward in Vancouver

>Gentlemen, I must apologize, I've been haunting this site for quite ome time and not posting. Not much of a turner, I'm the proud owner of a 1980's tubular steel Craftsman lathe that I've tweaked and fiddled, filled with sand, the bed, that is) and plumbed the length internally with redi-rod. Don't feel myself proficient enough to "graduate" to a decent(better?!!!)lathe, still have a lot to learn, and turn.

I've been learning on the tools that came with the lathe, "craftsman" tools, circa 1980's, cheap, but seemingly HSS, at least, that's what the sparks tell me when I sharpen them. Tools weren't that long to begin with, and with my "learning curve" I've shortened them even more, and have bought a new set of HSS tools. It's the grinder I'm worried about.

Just an el-cheapo, garage sale 6" 3450 rpm grinder with a 120 grit Norton White wheel(friable alum. oxide, I'm led to believe), a decent tool rest and sharpening jig, both from L.V. I'm worried about overheating the tool, I've butchered a couple of garage-sale chisels and screw-drivers on it, and am reluctant to try it out on my new lathe tools. I keep the wheel dressed and the machine well lit and clean, but I'm starting to wonder about the speed of the thing, seems too fast for me.

What would happen if I plugged the grinder into a sewing machine foot pedal, and blocked the pedal so it would only go down half-way, in theory, giving me 1750 rpm? Now, if you read between the lines you'll realize that I'm too cheap,(uh, make that thrifty) to go out and buy a decent 8" grinder with variable speed. I could do that, but I'd rather buy a decent live center or a chuck with that kind of money.

Suggestions?

Re: Grinder question

#2

Re: Grinder question

Doug Thompson near Cleveland

>First of all welcome. Second, there is nothing wrong with your lathe, I bought one in the early 80's and still have it. As long as a machine does everything you ask of it... it's a good machine and it doesn't matter what's on the name plate. That said;

A slow speed grinder is the most forgiving, couple that with you LV system and you'll be set. Buy a cheap slow speed grinder ($80 USD)

A 6 inch grinder with a 120 grit wheel will sharpen your tools but you need a very light touch on a fine wheel to prevent burning. Try a 80 grit wheel, this should help.

I sharpen a lot of tools on 8 inch grinders, a Dayton high speed and a Delta slow speed both set up with a Wolverine system.

For my personal turning tools I USE A 30 YEAR OLD 6 INCH BLACK AND DECKER GRINDER WITH A 120 GRIT GREEN WHEEL! NO JIGS, NO FANCY GAGITS AND I LOVE IT!

Re: Grinder question

#3

Re: Grinder question

john lucas

>Edward The sewing machine speed pedal won't work with that motor. It will burn it up. You also don't need it. From what I've read a 6" grinder at 3450 rpm is perfect for grinding HSS. HSS requires much higher controled temperatures to heat treat than carbon steel. They were designed to take the heat of cutting metal with out dulling. You can't hurt them on the grinder no matter how hot you get them.

You can hurt them quenching them in water to cool them down. I've read that it can cause micro cracks in the metal. I did quench in water for many years with no apparent bad results. In fact I still have some of the tools. When I was learning to sharpen I would grind, look at the faceted edge, and grind again until I finally got a sharp tool with very few facets. Of course during this heavy handed grinding I would overheat the tool often causing the edge to go blue. Then I'd quench it.

I try to avoid that today. I try to use a very light touch. That's all that's needed anyway. I move the tool across the grinding wheel and then leave it very close to the wheel to let the air cool it. Then I'll take another pass if necessary. I light touch lets you feel the bevel on the wheel so you know your cutting correctly.

An awful lot of turners started and are still using the tube lathe. It works better than my first lathe.

Re: Grinder question

#4

Re: Grinder question

Barry Irby

>I had a Craftsman tubular bed I bought when I was a kid in the 60's. I learned on it and so did my son in the 90's. Then I sold it for more than I paid for it. It's fine until you ut grow it.

If your grinder is a 6", the rim speed or the speed of the surface of the stone over the tool is not very different from the speed of an 8" low speed grinder. It's the ratio of Pii R squared. 3X3 is 9 and 4X4 is 16, but the larger wheel is spinning half as fast, so the ratio would be nine to eight. The smaller wheel would be running at 9/8's of the larger wheel. Not a significant difference.

Use a light touch and a good wheel and you are good to go. You won't hurt the HSS tools, or even ordinary ones if you are careful. Its an exercise in finesse, not strength.

Re: Grinder question

#5

Re: Grinder question

C.W.Stivison

>As a new turner I have found that the better you become at sharpening your tools the more hooked on turning you become. The first thing a new turner should do is find someone to mentor him or her on sharpening. Alot of different grinders and stones will work if you know how to correctly sharpen.

My two cents

CW

Re: Grinder question

#6

OOOP's

Barry Irby

>Just woke up to realize I posted the wrong formula. The concept is the same, just use a ratio of the circumferences. It would be Pii D, not Pii R squared. My Bad. Not enough tea before I started typing.

Re: Grinder question

#7

Re: Grinder question *LINK*

Marty - St. John's, Newfoundland, Canada

>Edward why don't you check out your Greater Vancouver Woodturners Guild(GVWG). They would be very interested in improving your sharpening and turning skills. I have included their website below. You can also go to the Oneway website and they have sharpening video's that you can download if you have high speed. If you don't have high speed you can request they send you a dvd free of charge. These videos highlight using Oneway's Wolverine sharpening system but the principles still apply to sharpening your HSS gouges and chisels. The best solution would be to join GVWG and get hands-on sharpening and turning information. They will also have turning demos by members and visiting guest turners.

Hope this helps ...

Marty (remove the 99 for email)

WWW.ONEWAY.CA


http://www.gvwg.ca/

Re: Grinder question

#8

Re: Grinder question

Edward in Vancouver

>Thanks for the website links and information! I have borrowed videos and books from the local library, and have learned some fundamentals, but it would be great to see someone actually doing it before my eyes.

So maybe I whined too much about the lathe. Picked it up cheap, looks like it sat in a garage for years, no play/runout on the bearing,and I got the rust off of the bed pretty easy. Problem was the tool rest base. No matter how much I tightened it it still wiggled. Spent some time really studying the thing and then realized that the track at the bottom of the tubular bed was pop-riveted on, and it was all loosey-goosey. So I dismantled the whole thing, drilled out the rivets, tapped the holes, epoxied the strip back on and screwed the strip to the bed with hex screws. I also jigged up a large diameter washer at the head end of the tube and ran a length of redi-rod through the bed, packed it with sand, and bolted town the tailpiece.(got that trick from an old magazine article in a library book) The lathe ran noticebly smoother with face-plate turning, but the tool rest still wiggled.

About this time, I saw an ad in the Canadian Tire weekly advert. for a woodworking lathe,and the picture was incredibly familiar. Had a peek at the store: Pretty much the same lathe but had some improvements, the tool rest base was cast instead of stamped steel contraption on my Craftsman. Took some doing, but I ordered a "spare part" from CDN Tire--the cast tool rest-- for the princely sum of $9.58, money well spent, I thought. But there was a difference of diameter sizes from the casting's holes that accepted the tube and my lathe's tube bed, I'm figuring the bed on newer models is metric, whereas the bed on older models is strangely similiar to boiler pipe tubing. So I improvised, I epoxied brass shim stock strips to the inside of the casting cut-outs, fashioned myself a locking lever by drilling into a the head of a metric bolt so as to accept the locking lever head from my old lathe, and stuck on a brass "bullet" from a bi-fold closet door hardware and gave it a try. The rest is not rock-solid. Now I just have to teach myself how to turn....

Re: Grinder question

#9

Re: Grinder question

eaglesc

>I hone my HF chisels with a diamond stone.

No fire hazzard and the tools last longer.

Also it is harder to scrw them up and they are sharper than those done with a grinding wheel.

No jigs to buy.

Would you sharpen your pocket knife on your grinder?

If the asnswer is yes disregard the above.

Re: Grinder question

#10

Re: Grinder question

john lucas

>Edward Your a man after my own heart. I always have to fiddle with every tool in my shop.

Re: Grinder question

#11

Re: Grinder question

Bill Howatt

>Edward,

I heartily endorse Marty's suggestion to get involved with a turning club. There probably isn't a group of people who are more willing to share their expertise, tips and techniques than woodturners no matter what part of the world they are in.

I had been turning a while before I went to my first meeting thinking I pretty well knew the basics. I learned more in that one meeting than I could ever have imagined.

Bill

PS: Many, many years ago I lived near 64th and Oak.

Re: Grinder question

#12

Re: Grinder question

Claudia Hayward

>Edward: If you want to learn all sorts of stuff about turning you really should come to one of our guild meetings and check us out. Marty gave you the link to the GVWG, Greater Vancouver Woodturners Guild, we meet the 4th Wednesday of the month out in New West. There's lots of content in every meeting and we also run a series of classes called Turning 101 for beginner turners. Our next meeting is March 28 at 6:30pm and we'd love to meet you!

Claudia

Re: Grinder question

#13

Re: Grinder question

Robert D. Macgregor

>I have one of the Canadian Tire tube lathes. Except for being a hassle to adjust anything while working, the only significant problem I have had was with the keyway on the bottom of the tube. This was held on with several screws tapped into the bottom of the tube. Unfortunately, they didn't use enough screws so pressure on the rest when it was between screw, caused the keyway to flex and the rest to wobble (actually twist to one side or the other). I just had my local machine shop drill and tap a couple of more screws into the keyway and it seems pretty solid now.

I'm saving up for a new lathe with cam lock adjustments and true variable speeds.

Re: Grinder question

#14

Re: Grinder question *LINK*

Darrell Feltmate

>Edward

Here are some thoughts on grinders and stones when I have too much to say here (not an unusual occurrence :-)) I still like my high speed cheap grinder and AO stones.


Around the Woods: Sharpening