Re: turning strawboard
Bob Way, Canton, MI
>I used to do product development for a wood products company out of North Dakota, and some of our projects involved strawboard. At the time it was made by PrimeBoard. You could turn it. Very likely though it will have a finished texture very similar to particleboard. It is made pretty much the same way under heat and pressure so the surface is smooth, but once you penetrate the surface there is a coarser texture. The cell structure of the straw gives it good water resistance, but it will have a high silica content. Sand is a silica, so you may need to plan some extra sharpening for your tools.
Six years ago, most of it went to door/window and some millwork manufacturers for use in exterior doors and door jambs. There was a trial attempt to sell it at retail, but at that time it had not gained much acceptance. You may find it under a veneer wrapped door jamb depending upon the manufacturer. Or you might be able to contact PrimeBoard.
Bob Way
Canton, MI