Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

HVLP help???

Posts

HVLP help???

#1

HVLP help???

Greg Haugen

>I have a compressor already. So I would rather not get a turbine set-up. Especially since I'm still in the "trial" period for this and I don't want to drop a lot of money. I also though don't want to get a plastic HVLP system for $90 from Woodcraft. I would like to at least have a metal gun. I'm looking for an affordable HVLP gun that I can put on my compressor, I guess a conversion gun. I have been told Harbor Freight carries something.

Below is a link to the HF page for HVLP.

Any help or suggestions?

Thanks

Greg Haugen

Re: HVLP help???

#2

Oops, here's the link

Greg Haugen

>http://search.harborfreight.com/cpisearch/web/search.do?keyword=HVlp&Submit=Go

Thanks

Greg

Re: HVLP help???

#3

Re: HVLP help???

matt overton

>check out Michael Dresdner's website. He has given me some great answers on hvlp in the past.

Re: HVLP help???

#4

Re: HVLP help??? *LINK*

dwr

>Greg,

I dealt with Nathan at Gleem and he was fantastic. I bought the Wagner conversion gun on sale for $125 three years ago and it is on sale for $129. Good brand of equipment

Also, they offer a gravity feed for $41.70, which I am considering for convenience.

The one I bought three years ago works great and I have used everything from shellac to paint.

No affiliation just a happy customer.


HVLP Conversion Gun

Re: HVLP help???

#5

Re: HVLP help???

John Scheideman

>I just bought a conversion gun about a week ago after doing a lot of research. I finally decided on the new Atomizer gun from Apollo. It isn't the cheapest gun out there but it is a really well balanced, lightweight metal gun that is supposed to do a super job of spraying just about anything depending on what needle you put in it. I haven't had a chance to use it yet but will do so soon. You get your choice of needle size when you buy and you can order other sizes individually or get a whole set of them. You also have your choice of the style of gun you want....gravity feed, pressure pot, etc. The gun will fit almost any other brand of pressure pot, cup, etc. also. One other selection you get is to specify whether you want the turbine or conversion gun. If you Google Apollo spray guns you will see this new gun on their website and they list a phone number so you can talk to them about it. They were very helpful. I even asked them to compare their gun to other brands such as Gleem, Binks, etc. They have other conversion guns also but the Atomizer is the latest and greatest.

My opinion about spray guns is that you get what you pay for. If you go too cheap you will probably not get the quality that you want. When it comes to finishing, I didn't want to compromise because, in my opinion, if the finish is bad the whole project looks bad.

Hope that helps. Good luck in your search.

John

Re: HVLP help???

#6

Re: HVLP help???

Darryl Hansen

>Greg, Don't know what you are going to use if for but if it is lite duty spraying of turnings for example you might try the "Critter". For lacquer it takes about 50#. It uses glass mason jars as the liquid holder. You can change from spray to cleaner as easy as changing jars. Amazon.com has them for about $40 or so. Only down side is that the spray pattern can not be adjusted so you need to work with a circular pattern all the time.