Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Sharpening for the Lathe *LINK*

Posts

Sharpening for the Lathe *LINK*

#1

Sharpening for the Lathe *LINK*

Peter Galbert

>In response to some questions, I've posted some info on my lathe tool sharpening techniques.

Pete


img

Chair Notes

Re: Sharpening for the Lathe *LINK*

#2

Re: Sharpening for the Lathe

Allen Neighbors

>Nice article, and very easy to understand. Good closeup photo, too.

Thanks for posting. I think I'll concentrate on keeping it sharper now.

Re: Sharpening for the Lathe *LINK*

#3

Re: Sharpening for the Lathe

eliot d

>Peter, Have you ever sharpened turning tools on a Tormek? If so, what do you think about it? I use it and find the sharpness just a tiny bit better than my grinding wheels. But I'm sure the readers here would like to get you opinion.

Re: Sharpening for the Lathe *LINK*

#4

Re: Sharpening for the Lathe *LINK*

Darrell Feltmate

>Peter

I like your approach to the question of sharpening. One of the things I have made myself do in recent years is to check the edge of the tool, consider it sharp, and then sharpen it anyway. It makes a difference. I think that I started after watching one of those AAW videos of clips of the turning symposia. John Jordan said to try just that and he was right. It is also one of the reasons I like my jig. Find the geometry that works, note it, and copy it every time.


Around the Woods - Sharpening

Re: Sharpening for the Lathe *LINK*

#5

Re: Sharpening for the Lathe

Peter Galbert

>If the tormek works for you great. I prefer a slow speed grinder at 1750 rpm. I find that like riding a bike, a little extra speed can allow you to balance better. On the tormek you have a bit more time to get off the correct geometry. My recent purchase of a real buffer (why didn't I do this 10 years ago?!) is a great example of this. I used to use a rig that turned my buffing wheels slower and had trouble not rounding the edge. Now, with a little extra speed, I can just knock off the burr and get to work, with much better control. But the real point is that whatever you can do to get yourself to sharpen more OFTEN is going to be the key. By sharpening more often not only will your tools be better, but you'll learn to pare your sharpening time down, hitting the essentials faster. The rest is just preference and what tools you happen to have around.