Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Mini Gloat and Question

Posts

Mini Gloat and Question

#1

Mini Gloat and Question

Rick Davenport

>I just snagged some elm burls.

The big ones have been out in the weather since last July, so they are a bit soggy.

The small ones have been in a woodshed and are ready to turn right now.

My question is, what do I do with these little buggers?

That's a 6 inch ruler in the foreground.

Thanks,

R


img

Re: Mini Gloat and Question

#2

Re: Mini Gloat and Question

Rick Davenport

>Here are the bigger burls.

They are pretty darn wet right now.

That's spalted maple in the background.

R


img

Re: Mini Gloat and Question

#3

Re: Mini Gloat and Question

Bart Rhoads

>The small ones should make some real nice natural edge hollow forms. The bigger ones you could make a couple of hollow forms with a small hole at the top. That way should show off the nice burl pattern across the top. But the options are unlimited. Just me opinion

Re: Mini Gloat and Question

#4

Re: Mini Gloat and Question

Rick Davenport

>Thanks for the suggestions Bart.

I don't have the tools for hollow forms and despite their popularity amongst woodturners, I haven't had the inclination to go that route.

While waiting for more input from y'all, I turned one of the smaller burls into a natural edge bowl.

It's about 4" wide and 2.5" high. I turned it 1/4" thick because I like to highlight the texture and the depth of the natural edge.

Comments are welcome.

Thanks,

R


img

Re: Mini Gloat and Question

#5

Oh Yea! That looks GOOD

Bart Rhoads

>

Re: Mini Gloat and Question

#6

Brad Vietje

Perfect

Brad Vietje

>Great job, Rick ! I was going to suggest you try that on the smaller ones, and protect the larger ones until you had decided how to make the best use of them. My suggestion for the bigger ones would be to hook up with someone not too far away who has a coring system, especially someone who has butchered a few burls, and get the most out of them, instead of making big piles of shavings on the floor. Once they are cored, you know what to do -- I can see that !

Safe spinning,

Brad Vietje

Newbury, VT

Re: Mini Gloat and Question

#7

Re: Perfect

Rick Davenport

>Thanks for the compliments Brad.

I have a McNaughton coring system that's never been out of the box!

I am working right now to get one of the local AAW mentors to drop by and help me figure it out.

I've got a lot of hunks of maple to practice on before I tackle my burls.

By the way, judging from the results of my first little burl, I would like to change my gloat from a mini to a full blown gloat!

R