Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

First piece from new (used) lathe

Posts

First piece from new (used) lathe

#1

First piece from new (used) lathe

Troy German

>I finally have a lathe of my own! It's a Jet 1236. Up until recently I�ve been using my brother�s (he�s also my neighbor). This is the first piece from my lathe. It�s Redwood, 5� tall and finished with Beal buff and carnauba wax.

Let me know what you think. It�s fun to hear others� opinions. All critiques, comments, and criticisms not only welcome but solicited.

Thanks for viewing,

Troy


img

Re: First piece from new (used) lathe

#2

Another view. 

Troy German

>


img

Re: First piece from new (used) lathe

#3

Worse picture, better color.

Troy German

>I�m only uploading this picture because it shows the color better. The horizontal bars you see in the background are from a vinyl window shade I bought in order to start building a photo booth. Any suggestions on how to get rid of those?

Thanks,

Troy


img

Re: First piece from new (used) lathe

#4

Re: Worse picture, better color.

Barry Turner

>Try using a foll-up window shade instead of the mini-blind type. Nice vase. Lace redwood can be very beautiful.

Re: First piece from new (used) lathe

#5

Re: First piece from new (used) lathe

Jake Niedling

>Glad your own lathe now and glad you posted your turning. It is a very nice piece of wood. The curves of your turning are good and seem to be continous. I would suggest that you consider changing the shape and make the largest diameter higher around 2/3 of the hieght and of course this would shorten the neck. Keep up the good work.

Re: First piece from new (used) lathe

#6

Re: Worse picture, better color. *LINK*

john lucas

>Troy Breat piece. I love good wood and you've done a good job on that piece.

That's my complaint about the window shades. Most that I have tried have a "set" or wave pattern created by being rolled up and it's impossible to get rid of. Some brands don't do that apparently but I haven't had any luck. My best suggestion is to let it hang for awhile possibly with a weight of some sort on the bottom.

You might try poster board. It's harder to store but forms a nice gentle curve that dissappears behind the piece. I prefer Seamless paper but it is more expensive. It comes in rolls 4 feet wide by 12 yards long. You can cut it with a handsaw so I recommend getting together with a friend and ordering a roll.

I don't recommend the graduated backgrounds. They look fantastic but they scratch really easy. If you want to shoot your own juried slides I would give them a try but don't slide anything on the background it will leave a mark.


http://porters.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=K1A

Re: First piece from new (used) lathe

#7

Looks good to me, Troy.

Eddie Pacheco, San Jose, Ca.

>Glad to see that you are cranking out some keepsakes (and maybe a bit of firewood) out of that Jet lathe. You weren't joking when you said you had access to some neat pieces of wood. It was also a pleasure to meet you and your wife Molly a few weeks ago.

I'm still working to get that Powermatic 90 going again. I have it dismantled and am getting ready to order a 2hp VFD for it.

Take care.

Re: First piece from new (used) lathe

#8

Re: First piece from new (used) lathe

Troy German

>Good eye Jake. I actually wanted the shoulder to be higher as well, unfortunately it got a little lower as I was turning away the rotten part in the neck. Oops.

Thanks for commenting.

Troy

Re: First piece from new (used) lathe

#9

Re: Looks good to me, Troy.

Troy German

>Thanks Eddie,

And thanks again for staying up late so I could pick up the lathe. It was fun to meet you and see some of your turnings and other things. Good luck with the Powermatic.

Troy

Re: First piece from new (used) lathe

#10

Backdrops

Troy German

>John thanks for your generosity with knowledge. Your comments are always helpful. What are the important properties to look for when searching for alternative backgrounds? I ask because I work at a plant that makes plastic bags. We make about 60,000 lbs of plastic film a day, much of it white. Needless to say, I can get enough to make a backdrop. But would plastic be too glossy?

Thanks again,

Troy

Re: First piece from new (used) lathe

#11

Re: Backdrops

john lucas

>Troy BAsically a background should be smooth (unless you really want texture) and should form a gentle curve from the piece up to the support. The only problem with really glossy backgrounds, such as plastic laminate and other plastic and vinyl, is that it will sometimes reflect unwanted light back to the camera.

Bed sheets and such will work but you need to iron them. Nothing looks worse than wrinkled cloth behind a piece.

As far as colors. A color should be picked to either contrast with the piece or compliment the piece. Be aware that colors are reflected into the piece and will change it's color. That's why it's not necessarily a good thing to use blue backgrounds. They make the wood look cold and wood should usually be warm feeling.

Re: First piece from new (used) lathe

#12

Re: Troy- the el cheapo vinyl shades.....

Jamie Donaldson

>... for $4.95 are most likely to show wrinkles, and the good $9.95 are heavier material and work better. Leave the one you have hanging as John suggested and the wrinkles will leave.

Re: First piece from new (used) lathe

#13

Re: You can buy rolls of

Allen Neighbors

>wrapping paper in black, gray, white, beige, yellow, red, and Jamie's favorite, blue :o), at Wal-mart... 32" widths. Cheap. Work pretty darn well. Cut the roll to the length of your Phrugal setup, and put a dowel through it for a hanger (I use copper grounding wire, off an old electric pole). When it gets wrinkled, torn, or dirty, trim it off, and pull out more.

My .02

Re: First piece from new (used) lathe

#14

Re: First piece from new (used) lathe

Allen Neighbors

>Looks to me like you learned well on your Brother's lathe, too.

Beautiful wood, turned well!! Congrats on the new lathe, also. :o)

Turn, turn, turn.