Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

I started a fun project yesterday *LINK*

Posts

I started a fun project yesterday *LINK*

#1

I started a fun project yesterday *LINK*

Keith Newton

>I got a big cherry tree this week, over 3' diameter, and have started turning some pretty large platter / shallow bowl shapes that I intend to cut up and make cabinet sides, tops, and bottoms, so there will not be any flat, or even simple curve in one plane to the outside.

I am turning green, and plan to dry the parts as if I was making a green lathe turned bowl, then start working them into parts after they have dried and finished moving.

Do any of you know of anyone else using their turning like this to make furniture parts. NOT spindle turning,

This is not a commissioned piece, but I have been invited to teach a course at Eureka Springs School of the Arts, ESSA, this spring, and I am just knocking out some parts ahead of time, but this will be part of the direction.

There will also be some time spent on making hinges, so it can be opened in ways that can't be achieved with off of the shelf hinges.

The class project will be somewhat like a piece that I did that is in the shop shots from the link below, only it will be smaller, and function as a stand alone jewelry chest.

Needless to say this will be a fairly advanced class, and everyone in the class will be working with me as helpers, rather than each person working on their own project, so you will only leave with the knowledge that I share with whomever signs up for the class.

I know this may sound like I am promoting this class, but I really would like to see what others are doing. I usually try to avoid having my work look like something someone else has already done. It is not that hard to find a space between the lines on normal stuff, but I think there is probably lots of room to move when you get away from the flat plane, and curves on one axis.


http://www.woodcentral.com/shots/shot728.shtml

Re: I started a fun project yesterday *LINK*

#2

Beautiful!

Jennifer@Indy.USA

>Keith,

I don't turn for furniture, spindle or otherwise, but I just want to tell you that this piece in your Shop Shots is fantastic! What a design challenge. It looks funtional as well as beautiful. Fabulous job! Glad I gave it a click!

Jen

Re: I started a fun project yesterday *LINK*

#3

Thanks Jennifer

Keith Newton

>When I finished that piece, I had a flood of inspirations for other pieces, but it seems since then, I have been caught up in supplying the demand, which means more flat surfaces.

After about 35 years of trying to make flat surfaces out of lumber that would like to be otherwise, I have finally decided to quit shooting for that, and deliberately go the other way. What the heck, If I were out to make money, I might have been a bwain surgeon. I like to do challenging work every now an then just for the fun of it.

So after 250 views, nobody seems to know if anyone is doing anything like this, or can provide me with a link. I guess I will just keep on exploring ideas as they come. I do hope the class will make, so I can have others to bounce ideas off of.

Re: I started a fun project yesterday *LINK*

#4

Re: I started a fun project yesterday

Troy German

>Keith,

First of all, that desk is beautiful. I�m amazed at how well it represents a tree but still looks thoroughly man made (e.g. you didn�t resort to using a real branch as the base). Keith, I don�t have the art vocabulary to describe why I think this piece is so good, so I�ll have to end my compliments here.

As for as others doing something similar, I�m no expert on construction techniques, but I got a coffee table book recently called �400 Wood Boxes� published by Lark Books. Your piece would be right at home in this book. It showcases many different artists� �boxes� (the term is used loosely to mean anything with a concealed chamber). It doesn�t describe the pieces at all but just gives the standard info, artist�s name title of the piece and woods used. I just skimmed through it again to find other artists that might be doing something similar to what you are doing. One name is Ray Jones (p. 42-44). The credits list him as working in North Carolina. Another is Michael John Craigdallie (p. 126) in B.C. Canada. I�m not sure if he is using a lathe at all though, but his work is more in line with your concept (his piece is inspired by the Lotus plant).

Thanks for showing your work. I enjoyed viewing it.

Troy

Re: I started a fun project yesterday *LINK*

#5

Thanks Troy,

Keith Newton

>That was what I was looking for, Michael has a neat website, I found him at Furniture Society. We have done similar things back through the years, only plenty of space between. I feel safer with my concept now, thanks. K

Re: I started a fun project yesterday *LINK*

#6

Re: I started a fun project yesterday

Danny Wells

>Keith, that is just awesome. That's all I can say. Amazing!!!

Re: I started a fun project yesterday *LINK*

#7

Thanks Danny, I appreciate your comment.

Keith Newton

>