Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Buying Sander

Posts

Buying Sander

#1

Buying Sander

Tommy Holmes

>My stationary belt/disc sander (1/3 hp) burned up today and want to buy a new sander. Willing to pay up to $200 - $250 for the new one. Do I buy:

1a) another belt/disc unit @ my max budget (maybe Sears or Delta - 6" belt/9"disc)

1b) another belt/disc unit $99 (4" belt/6"disc)

2) Disc sander (12")

3) Oscillating Edge/Belt Spindle Sander (Ridgid)

I don't do any heavy sanding just what I need to flatten and trim pieces I'm going to turn and light duty home projects. I appreciate all comments.

Re: Buying Sander

#2

Re: Buying Sander *LINK*

Rich Anema

>I got a Rikon 50-120 belt/disk sander a few months ago and love it. I got it at Woodcraft for about $220 but it usually is about $250.


http://www.woodcraft.com/family.aspx?familyid=5385

Re: Buying Sander

#3

Richard Allen

Re: Buying Sander

Richard Allen

>How about getting the motor repaired or replaced. A 1/3 hp motor shouldn't cost more than $50. That way you can buy wood with the $200 left over(;->)

Re: Buying Sander

#4

Ouch!

Tommy Holmes

>I checked on the motor and it was $135!!!!!!!!!!!!! That didn't include the belt and pulley that need replacing too. This is one of those $100 or less models so I'm going to pass on the new motor. Decided to and did order a 16' x 20' pre-fabbed shop with same size carport on the side. When I get it in a couple of weeks I'll drag the shopsmith out of storage and use the disc sander on it. Best solution I could come up with.