Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Delta Lathe Repair Question

Posts

Delta Lathe Repair Question

#1

Delta Lathe Repair Question

Barry Irby

>About seven years ago, I bought my son a lathe at Home Depoe (I think). It was about $400. I have forgotten the model number. My son sold it before Christmas to a friend for a Christmas gift.

The lathe has a head that swivels and slides. There is a square "shackle" inside the head that has a cam in it that locks the head in place. The shackle broke. Somehow, this is my problem.

The people that bought the lathe claim Delta has stopped making the lathe and no longer support it. On some occasion I looked it up and the shackle did not have a part number. It seems to me there was a "46" in the lathes designation.

Does anyone know the model number and whether or not parts are available?

Re: Delta Lathe Repair Question

#2

Re: Delta Lathe Repair Question

ben d.

>might try here.

http://www.acetoolrepair.com/

Re: Delta Lathe Repair Question

#3

Re: Delta Lathe Repair Question

Lester Gillett/Independence Mo

>Berry call this number and ask for greg. He works for Delta/PC in

Kansas City Kansas and is real good with the older tools. (913)

495-4330. Tell him Lester sent you.

Lester

Re: Delta Lathe Repair Question

#4

Re: Delta Lathe Repair Question

Bob Way, Canton, MI

>7 years old and no longer supported it might be the 46-700. A Delta Service Center might be able to help you out. Local ones can be found on the Delta website. The parts may no longer be made, but there may be some sitting in an inventory somewhere. Also, a want ad on a forum or auction site might find one for you.

Bob Way

Re: Delta Lathe Repair Question

#5

Re: Delta Lathe Repair Question

Wilford Bickel

>Looking at my Delta 46-755X X5 lathe, if I am looking correctly the "shackle" that you are referring to looks like nothing more than a hardened U bolt. If that is what yours looks like, you may be able to take it to a good industrial supply store and find one to fit. Mine also has nylon insert nuts to prevent them from vibrating loose.

Wilford