Ebony and brass inlay
eaglesc
>Perfect fit by Berea
LAcquer finish
Knowledge You Can Build On — Est. 1998
Ebony and brass inlay
eaglesc
>Perfect fit by Berea
LAcquer finish
Nice!
Ron in Drums PA
>I bet that even looks better in person!
Nice job eagle
Re: Ebony and brass inlay
Tommy Holmes
>This may very well be the most beautiful pen I have seen.
Whoo! How'd you do that???
Ellis Walentine
>
Re: Ebony and brass inlay
Frank G ( Ingleside Texas )
>I don't turn anything. Just want to so keep reading and looking and people like you post things like this. It makes me want to jump in and at the same time it scares me I'll never be that accomplished.
So I want a complete explanation with pics or it will be your fault that I do not fall into the abyss (sp)
Way, Way Cool Eagle
Dennis Yoder
>
Re: Ebony and brass inlay
Bob Way, Canton, MI
>Your combinations, and constructions, are always so pleasing. Nicely done.
Re: Ebony and brass inlay
eaglesc
>"Frank G ( Ingleside Texas ) <2bows@pelicancoast.net> -- Friday, 2 March 2007, at 7:19 p.m.
I don't turn anything. Just want to so keep reading and looking and people like you post things like this. It makes me want to jump in and at the same time it scares me I'll never be that accomplished.
So I want a complete explanation with pics or it will be your fault that I do not fall into the abyss (sp)"
Sorry Frank though I know what you wrote is meant as a compliment you cannot blame me if you don't attempt anything.
Come this June it will be three years since the day I turned a lathe on the first time in my life or held a chisel.
That is the day I made my first pen.
I am a self taught "turner" and a self taught pencrafter.
There are no tutorials for what I want to make because what I want to make is anything I have not seen done.
Contrary to popular beief there is still something new under the sun and that is what I would like to create.
Turning a square object and making it roundwith a sharp object is not rocket science.Metal beats wood everytime.
As far as you(in your own words) Not"wanting to jump in and at the same time it scares me I'll never be that accomplished."
Most of what I do is done with a Grizzly contractors table saw, and a used Dremel scroll saw so it isn't the cost of the tools that make the blanks unique it is imagination.
In the words of Richard Bach in Illusiions'
"Argue your limitations and they are yours"
Lastly I would like to leave you and others with a question:
Think of the very first man woman or child who turned anything on the very first crude and rudimentry lathe...
What tutorial did they get to watch? Which class did they attend?