Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Finish for box elder?

Posts

Finish for box elder?

#1

Finish for box elder?

Scott Hurley in N. VA

>I'm sure this question has been asked before, but what's a good finish for box elder to keep the nice light color? I usually use an oil-based finish (e.g. Watco), but I'm afraid that might darken the box elder. I was thinking of water-based poly, but I'm not sure. Suggestions? Thanks.

Scott

Re: Finish for box elder?

#2

Re: Finish for box elder?

Gary Evans Tallassee, TN

>To me, water-based poly gives a bluish tint to light colored wood. I like lacquer for a clear finish on box elder.

Gary

Re: Finish for box elder?

#3

Re: Finish for box elder?

Jim Swank

>I commonly use Behlens salad bowl finish. It's not water clear, but ambers only slightly, much less than Watco danish oil.

Re: Finish for box elder?

#4

Re: Finish for box elder?

Mac

>Lacquer works the best for me....

Re: Finish for box elder?

#5

Re: Finish for box elder?

Ryan Dicker in Renfrew, Ontario

>Sometimes I use Walnut oil for Box Elder if I want to keep the colour. It goes on relatively clear and will still provide a little enhancement of the figure without the discolouration. From my experiences though, I find that it is not as durable as a standard oil finish (Linseed oil for example) so many coats are in order. It's food contact safe and water/alcohol proof. One of my favourite finishes to use on any wood.

Ryan

Re: Finish for box elder?

#6

Re: Finish for box elder?

Bob Rogne

>Scott

I turn a lot of box elder burl and non burl and find that lacquer is the best for keeping close to natural color. (Both light wood and red-black or blue colors in the wood).

Just my thoughts.

Bob R

West Mac Turning in Mesa

Re: Finish for box elder?

#7

Thanks and a follow-up questions

Scott Hurley in N. VA

>Thanks to all who have responded. Question for the 3 of you who suggested lacquer - do you spray, brush, or wipe it on? Do you thin the first coat? Thanks.

Scott

Re: Finish for box elder?

#8

Re: Thanks and a follow-up questions

Mac

>Hi Scott, As I dont use lacquer a lot,I use the spray cans that I buy at the lumber yard.Probably not the best grade,but it works well for me.Does take several light coats to get a good build.The last couple coats I use the matte or satin type as I dont care for a shiny finish on most things.If you have some extra box elder,try bleaching some of it. It looks very similar to holly when bleached.