Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Cherry Bowl

Posts

Cherry Bowl

#1

Cherry Bowl

Ronny Eelen (Belgium)

>At least, I think it is cherry.

22 cm by 11 cm. Sanded through 1200.

When I sanded with 600 the imperfections started to show. Some low areas were left on the inside which came out clearly at 600 grit.

Comments are again very welcome.

regards

Ronny


img

Re: Cherry Bowl

#2

Re: Cherry Bowl

Bill Hale / Woodspinner

>Those rough lines etc that showed at 600 may have been visible at 320 but you were just not aware.

As you sand start grit as needed and move through the numbers. Don't think you can skip forward. What became obvesious at 600 likley is because you did not get them out at 120.

Lots of light helps make the visable early on.

Nice piece and I love the form.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Cherry Bowl

#3

Re: Cherry Bowl

Mike from Tn.

>Great looking bowl. Just finding out the quality of cherry myself. Whats the size and finish

Re: Cherry Bowl

#4

Re: Cherry Bowl

Mike Rubes, Apex, NC

>Hi Ronny,

Nice! I like the rim treatment on this one.

Nice overall form as well.

Thanks for posting the pictures.

Mike

Love to turn Cherry in Apex, NC

Re: Cherry Bowl

#5

Re: Cherry Bowl

RevDoug

>Ronny, these areas that don't seem to show up until the later grits can only be gotten rid of by backing up to a previous grit when you do begin to see them. By going on, you are only polishing up the wood that surrounds the bad areas and making those areas look even worse. As soon as you see them, back up two or three grits and see if you can't get rid of them.

Turn 'em round,

Re: Cherry Bowl

#6

Re: Cherry Bowl

Ronny Eelen (Belgium)

>Thanks for comments and advice.

The size is 22cm by 11cm, that is 9" by 4.5" or something. There is no finish on it. The shine is from the sanding with 600 and 1200.

Indeed, I have bad lighting in my workshop. It's temporary and insufficient for the moment. So I guess it probably is correct that I just didn't notice it yet when working with the lower grits.

That's a good number of lessons I am learning here. Thanks