Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Placement of Pyrography?

Posts

Placement of Pyrography?

#1

Placement of Pyrography?

Dominic Greco in Richboro PA

>Hi Everyone,

I finally got out to the shop for a bit Saturday and Sunday. I was looking through my vast collection of dry, roughed out bowls and came across this little cherry one. For a long time now I've been wanting to embellish a bowl with some pyrography. A couple years ago I got a Burnmaster Hawk for my B-day. This this bowl was the perfect size for my first attempt.

I wanted to add a ring around the top, above the widest portion. The design would be a diagonal "basket weave". I took a picture and used Paint Shop "chimp in" (my phrase for "throwing something together quick and dirty").

On the advice from my buddy Tom Skaggs, I also sketched up a version with the band up closer to the rim. I'll attach that sketch as well.

What do you think?

See ya around,

Dominic


img

Re: Placement of Pyrography?

#2

Second version

Dominic Greco in Richboro PA

>Here's the version with the band closer to the rim.


img

Re: Placement of Pyrography?

#3

Re: Placement of Pyrography?

Russ Babbitt Jr.

>I like No. 1.

Re: Placement of Pyrography?

#4

Re: Placement of Pyrography?

Tommy Holmes

>Really like the first one with the ring just above the widest part.

Re: Placement of Pyrography?

#5

Re: Placement of Pyrography?

Wally Dickerman in Arizona

>Hi Dom...Because you've already accented the rim with a bead, I prefer the first version with the pyrography away from the bead.

A very nice shape on the bowl...you haven't asked for a citique but I'll suggest that the foot be a bit smaller in dia. That will allow the nice curve to continue a bit further and give the bowl a little more "lift".

Wally

Re: Placement of Pyrography?

#6

Re: Second version

Gary in Zirconia, NC

>I like the second one.

Re: Placement of Pyrography?

#7

Re: Second version

Sam Nelson

>Hi Dominic

I prefer the 2nd one, also I agree with Wallys comment regarding the foot.

Take Care

Sam

Re: Placement of Pyrography?

#8

Bob Moffett

Re: Placement of Pyrography?

Bob Moffett

>I like the second one the best with a little smaller foot.

Re: Placement of Pyrography?

#9

Thanks Wally

Dominic Greco in Richboro PA

>Wally,

Thanks for the input! I really appreciate it.

I agree with your assessment that the foot is too big. It wasn't until I brought the photo up and then rotated it that I saw that it should be a bit smaller. (I should really do that more often. I never realized what a great design tool this could be!)

I think I can safely make the foot at least 1/4 to 1/3 less in diameter. I was also going for a lower foot as well. I wanted something that made the bowl seem to float above the surface of a table.

Thanks again.

Dominic

Re: Placement of Pyrography?

#10

Re: Placement of Pyrography?

Russ Fairfield

>Why use either?? The bold grain in this piece of wood would look fine with just the bead. Save the burning for a plainer piece of wood.

If you insist on the decorative bands, using both might be the better option. Put a narrow band of plain wood between the bands. And, you might condiser removing the bead.

Re: Placement of Pyrography?

#11

Keith Tompkins

Re: Placement of Pyrography?

keith tompkins

>HI Dom, I like the bead and the decorative treatment touching....otherwise, your eye doesn't know which design element to focus on; they seem to compete with each other. I agree the foot could be smaller. Nice form!

Re: Placement of Pyrography?

#12

Re: Placement of Pyrography?

Mike Rubes, Apex, NC

>Hi Dom,

Like others, I think the piece stands on its own, but if the piece was about playing with the burner, I like the first option of having the hatchwork a bit lower.

I've had a burnmaster hawk for about a year and really like it. Post a pic of the piece when you are done.

And as usual, Wally gives spot on advice. I agree that the foot could be smaller.

Thanks for pics,

Mike

turning and burning also in Apex, NC!