Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Cherry question

Posts

Cherry question

#1

Cherry question

Mike from Tn.

>I've come upon some 14" cherry boards and am dying to try out the 29" capability of the new NOVA I got two weeks ago. I thought I'd try a big serving platter. But I've not seen too much if anything posted on the site. Is there a reason people don't do much with cherry or am I not looking hard enough? I've done several projects with cherry and I love the fact that it's very forgivinf but have not turned with it.

Re: Cherry question

#2

Brad Vietje

Look Further !

Brad Vietje

>Hi Mike,

Black cherry is a favorite wood of many turners. I tend to use it for one-piece, twice-turned bowls, natural-edge green turned bowls, and I turn Cherry burl whenever it can be found ! I have no experience making bowls or platters from KD glue-up's, but there are many here who do, and I presume they will chime in.

Have fun !

Brad Vietje

Newbury, VT

Re: Cherry question

#3

Re: Cherry question

Bill Hale / Woodspinner

>I you are going to do a glueup be careful on your trim cuts.

Had my thumb sewed back on last Wed. and it still hurts like @#$%^.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Cherry question

#4

Ouch!!

Greg Haugen

>

Re: Cherry question

#5

Re: Cherry question

Ron in Drums PA

>Cherry is one of my favorites to turn!!!

Re: Cherry question

#6

Re: Cherry question

Brent at Robust

>I'm with Ron, cherry is my favorite wood to turn, especially burls, which are just fantastic. Suggest you glue up your boards with one accent strip (like maple) off center in the lay-up. That makes a really nice platter. If you look around in turners galleries, you'll see examples of what I'm talking about. Good Luck with it.

Re: Cherry question

#7

Re: Cherry question

Barry Irby

>Bill, hope the thumb heals well. I cut mine alsmost off 42 years ago. I was 15. The doctor wanted to remove the first joint of the thumb on my right hand. I would not allow it. Glad I didn't. The bed under the nail was partially destroyed, but otherwise it serves me well. Took years for the nerves to straighten themselves out. The skin still peals easily in winter, but much better than no tip on the thumb. Good luck with yours.

Re: Cherry question

#8

Re: Cherry question

Jim Pugh, Elyria, OH

>Hi Mike, just because your lathe can turn 29" doesn't mean you should jump in at that size. I suggest you start at a more modest size, say in the 10-12" diameter range until you get used to mounting the work, turning fairly thin, flat material. Then work your way up.

Also, consider what you would do with a platter that size - it won't even fit on most counters and certainly not in most cupboards. So, think about the design and make it so it can be hung on the wall.

Re: Cherry question

#9

Re: Cherry question

Rick Davenport

>Cherry burl is one of my favorites too.

Here is an example.

Go for it!

R


img

Re: Cherry question

#10

Listen to Jim!

Carole Valentine

>He has some very good points.

As for Cherry, our wild Black Cherry is wonderful stuff. I grab all of it I can get. This is my latest find - a big ole cherry burl with wonderful figure and the added bonus of carpenter bee holes. :)


img

Re: Cherry question

#11

Re: Listen to Jim!

Jim Shaver Oakville, Ont.

>Hey Carole,

I wonder how many pen blanks are in that beauty, eh!

:-O

Take care,

Jim

Re: Cherry question

#12

Safty first

Mike from Tn.

>Yes I am a rookie turner of only a year but a construction worker of 30yrs. I've still got all ten. Real good advice though. Caution caution caution when it comes to any tool. From a shovel to a D9 dozer. Only fools rush in. Nice burl Carole. Whats that puppy weigh?

Re: Cherry question

#13

Wow at least 100 of your larger pieces ;)

Stuart Johnson

>