Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

All I can say is "Wow!"

Posts

All I can say is "Wow!"

#1

Steven Antonucci

All I can say is "Wow!"

steve antonucci

>My wife yelled down that I just got a package from Lee Valley, so I just about broke my leg running up the stairs.

It was my new low angle block plane!

It's very easy to see why the handtool guys get so excited about these things. I went to the Somerset Woodworking show last Saturday, where the guy told me it would be about 10-14 days until I received my order. Delivered in 6.

I had to put it to wood, and without any fuss, I managed to take the thinnest of shavings that I've ever seen. Come Five Barns this year, I may just have a chance at that planing contest! The shavings are so thin that they're clinging to everything due to the static charge... and I haven't even gone over the plane yet.

I can see another order in the future...

Steve

P.S. I didn't even get the cabinet scraper plane out of the box...hurry up weekend!

Re: All I can say is "Wow!"

#2

Re: All I can say is "Wow!"

Mitch Cholewinski

>Steve

Congratulations on getting your low angle block plane. All I can say about planes is Careful!!!!! Buying hand planes is very addictive. as addictive as buying turning tools and lathes. Your going to like this plane, it's a real keeper. I got into the hand plane addiction several years ago and have every one Veritas makes and a couple dozen Stanley's and a few other foreign makes. They are great.I make a lot of furniture and the scraper plane is the best thing that ever happened to hard wood. No more sanding. One word of advice about the scraper plane though, if you don't mind? It is a great plane to start with but what makes it much better is in the sharpening. Do it right and it is amazing. Sharpening is the secret to successful planing, just like sharpening turning tools, but it is done differently. Good luck. Mitch

Re: All I can say is "Wow!"

#3

Steven Antonucci

Just drew "First Blood"

steve antonucci

>Literally, but not in the way you might expect!

I had to try to sharpen the microbevel on the A2 iron, and I'm not sure if I'll be able to use my Tormek. The flat blade jig is having trouble lining up on the angle. Any ideas?

Back to the bleeding thing- I managed to sharpen the iron on a piece of 2000 grit automotive wet/dry, but it's not where I cut myself... no...

I cut my left middle finger when I actually made contact with the small stick of cherry that I was testing the plane on. I had planed two opposing faces to 90 degrees and MAN IS THAT SHARP. Razor clean cut.

Brought a smile to my face. How sick is that?

Steve

Re: All I can say is "Wow!"

#4

Yeah man!

Dominic Greco in Richboro PA

>Steve,

I just got a Veritas Low Angle Smoother for Christmas and absolutely LOVE it! Once I got the A2 blade installed, I ran out to the shop and took a test run on a figured maple 1 x 6. The shaving was so thin ,I could SEE THROUGH it! And it was a nice consistent thickness. I was thinking the same thing about bringing mine to 5 Barns "Shave Off" this year.

See ya around,

Dominic

Re: All I can say is "Wow!"

#5

Re: Just drew "First Blood"

Mitch Cholewinski

>Steve

Not sure what Tormek jig your referring to butIf you have the flat tool rest jig you can use that to sharpen the blade.If you bought the bevel master jig just line the table up with the wheel using the bevel master, at the desired bevel. Wth this set up you then sharpen the whole bevel. Then raise it 2 or 3 degrees and grind your microbevelYou don't want much of a micro bevel. Why are you sharpening the A-2 blade already? They come from Ron Hock and always are ready to sharpen. He sometimes recommends you hone if you want.Search out Rons page on sharpening. Good info on there. BTW, yes your Tormek will sharpen that blade. Mitch

Mitch

Re: All I can say is "Wow!"

#6

Re: Yeah man!

Mitch Cholewinski

>Dominic

That smoother is the best on the market for that kind of money, I miked every shaving that I got when first getting the plane. At the time there was some guy from Australia reviewing his same plane and posting the thickness of his shavings on different hardwoods. I did the same thing and my results were near identical to his. On a couple kinds of wood my best was better than his. Back to turning? Mitch

Re: All I can say is "Wow!"

#7

Steven Antonucci

We'll have to have 2 categories

steve antonucci

>one for low angle block planes and one for everone else!

Honestly Dom, I don't know how you could take a thinner shaving than this thing takes. You wouldn't even be able to pick it up without it disintegrating. I'll take a picture later today.

Steve

Re: All I can say is "Wow!"

#8

Steven Antonucci

Picture of the shavings! 

steve antonucci

>


img

Re: All I can say is "Wow!"

#9

Re: All I can say is "Wow!"

Ron in Drums PA

>I have that plane, she is sweet!