Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Things they don't tell you about finishing.

Posts

Things they don't tell you about finishing.

#1

Things they don't tell you about finishing.

georgetroy

>This is kind of a run down of do's and don'ts. Others may add to what I forgot. Finishing at cold Temp's: Heat your shop to at least 65*-80*. Bring your finish inside to keep warm. You can even bring in your projects before you hit the shop. Keep your projects in a paper bag to avoid stinking up your house.

Be careful what you wear: belt bundles, watches and magnetic metal bands will scratch. A couple of my shop coats have zippers in front and when I sand each time I can and have scratched the surface.Ouch! Place your projects on a safe surface so that they won't get knock off, been there and done that.

Sand as smooth as possbile before you finish. Look for end grain before you take your project off the lathe. You need flashlight, spot light or whatever it takes for this. Too many times I failed to do this. Ouch again! Be careful about starting with a course sandpaper they will cause unexpected scratches. Ouch! DO work up your grades and sandpaper, and watch the edges of your paper and discs. Ouch! If you can reach the inside with your fingers, sand it; because your customers and friends certainly will.

Try and do your best each time. That means like no dimples on inside and outside. Oh yes, fresh finishes will leach through at the bottom when set on furniture. Maybe safe after 30 days. Done that before. Ouch! If your project smells real strong from finishing consider more drying time be placed in a home or on display.

With this writing I have tried to avoid brands or your personal finishes. GT

Re: Things they don't tell you about finishing.

#2

Re: Things they don't tell you about finishing.

Tommy Holmes

>Been there, done that. Thanks for the reminder.

With my memory I'll probably remember reading this right after I do something dumb :)

Re: Things they don't tell you about finishing.

#3

Re: Things they don't tell you about finishing.

georgetroy

>I forgot to say anything about the runny nose droping on your work. I had some close calls this morning. I'm ready for Spring, enough of this cold stuff. GT

Re: Things they don't tell you about finishing.

#4

Re: Things they don't tell you about finishing.

Bob Fawcett

>How about wipe down your work with the thinner for your finish to help see the scratches before you put the finish on.

If this implies water, you may want to pick mineral spirits instead.

Re: Things they don't tell you about finishing.

#5

Re: Things they don't tell you about finishing.

Mark Wollschlager

>How about:

Put something soft under your buffing wheels just in case the piece grabs on one of the final few passes.

mark