Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Production Coffee Scoops

Posts

Production Coffee Scoops

#1

Production Coffee Scoops

Ruth Niles

>Hi,

Since my coffee scoops have been mentioned in a previous post, I thought I'd post these pictures of 2 dozen going out today to an artisan gallery in NY state.

I put leather straps through the handle with a tag tied on telling the wood type and this description: "This scoop is a relica of seed scoops used 100 yrs. ago when seeds were sold by weight. Various size scoops were used to one scoop of various size seeds equaled the same weight. This scoop measures 2 tbls., use 1 scoop of coffee for every 2 cups of water." I used very tiny print to be able to have a small tag.

I have to submit a picture of this shipment to the gallery for their spring Open House brochure, which do you think is most appealing?


img

Re: Production Coffee Scoops

#2

Re: Production Coffee Scoops Pic #2 

Ruth Niles

>


img

Re: Production Coffee Scoops

#3

Scoop with Tag 

Ruth Niles

>


img

Re: Production Coffee Scoops

#4

Re: Production Coffee Scoops Pic #2

Mike Rubes, Apex, NC

>Hi Ruth,

Those are wonderful. I like this picture, with them all horizontal, better than the spokes of a wheel picture.

Good luck and I hope they all sell very quickly! Do you put any finish on them?

Thanks for the pictures, fun stuff!

Mike

Re: Production Coffee Scoops

#5

Re: Production Coffee Scoops Pic #2

John Lucas

>I like the spokes shot. Great looking scoopes. How thick is the wood at the handle attachment point? Also do you do anything special to keep the handle attached? I've had a few problems over the years with my mirrors so I now cut small notches in the tenon with the bandsaw and then use epoxy to attach the handle. As far as I know I haven't had any problems with this method.

Re: Production Coffee Scoops

#6

Re: Production Coffee Scoops

Ken Grunke from SW WI

>Ruth, to me the second pic looks a bit chaotic and unorganized, I really like the circular arrangement of the first image.

Your scoops are delightful, I'm envious of my fellow club member Greg Haugen!

I'm curious, is the ring a seperate piece, or part of the handle but turned on a different axis?

Re: Production Coffee Scoops

#7

The Scoops in a Circle  *LINK*

Barbara Gill, Remlik VA

>


Woodworking In The Round

Re: Production Coffee Scoops

#8

No finish, Mike

Ruth Niles

>I just rub them with a little mineral oil and beeswax and buff with a very tiny bit of wax on the wheel. The cup part gets silky smooth after a lot of use from the oils in the coffee.

These are wholesale so I get paid instantly : )

Re: Production Coffee Scoops

#9

John, the handles

Ruth Niles

>I drill a 1/4" hole in the cup so the handle has a 1/4" tenon and I do cut tiny grooves in it so the glue grabs. I use Tite Bond II and have not had any problems with them coming loose. I do use a rasp to rough the tenon on African Blackwood, Ebony and a few other of the oily woods.

Re: Production Coffee Scoops

#10

Ken, I wish!

Ruth Niles

>Ken, thanks for the compliment. I wish I was good enough to do different axis turning. : )

I glue up blocks with a 2" piece cherry, 5/8" piece ebony and 1/2" piece of cherry then turn the cup. The 2" piece goes in the chuck, naturally. I turn the handles separately.

Re: Production Coffee Scoops

#11

Re: Production Coffee Scoops Pic #2

Jerry Whitaker

>I prefer the circular pattern picture also.

Re: Production Coffee Scoops

#12

Re: Production Coffee Scoops

Stuart Johnson

>Ruth, Sorry but I don't care for either photo. The circle is my least favorite as my eye is drawn to the center and I don't see the scoops. The horizontal appears too chaotic. May be try a couple circles with the scoop on the inside. One similar to the one you posted and one with the scoops staggered.

Re: Production Coffee Scoops

#13

Re: John, the handles

Stuart Johnson

>How deep is the hole you drill and do you drill it prior to turning?

Re: Production Coffee Scoops

#14

Re: Production Coffee Scoops

Carole Valentine

>Ruth, I like the first one, but then I am one of those "round" type people. :)

Re: Production Coffee Scoops

#15

Re: Production Coffee Scoops

Bruce

>Ruth, of the 2, I prefer the circular one. These are absolutely gorgeous.

~b

Re: Production Coffee Scoops

#16

The circular display pic is best. Great scoops!!!

Gil Jones, Lake Seminole, GA

>

Re: Production Coffee Scoops

#17

Re: Production Coffee Scoops

Norm Smith in Nova Scotia

>Ruth, Beautiful scoops. I prefer the circular one also.

Re: Production Coffee Scoops

#18

Re: Production Coffee Scoops

eaglesc

>The circular one

Re: Production Coffee Scoops

#19

Re: Production Coffee Scoops

Cyril Griesbach

>

Re: Production Coffee Scoops

#20

Re: Production Coffee Scoops

Cyril Griesbach

>Something went wrong. I'll say circular.

Cyril

Re: Production Coffee Scoops

#21

Re: Production Coffee Scoops

Brodie Brickey

>Ruth,

The scoops are beautiful. As for pictures, I prefer the circular, but which one they use for the newsletter may depend on the formating of the newsletter.

Brodie

Re: Production Coffee Scoops

#22

Re: Ken, I wish!

Don in Central Illinois

>How do you know how big to make the scoop so it equals 2Tbs? Trial and error? I'd love to learn how to make them.

Re: Production Coffee Scoops

#23

Re: Production Coffee Scoops

Russ Fairfield

>Not being contrary, but I wouldn't use either of them. Instead I would use a photo of a single ascoop (without the tag).

The array only shows how many you made, and that there are some differences in them. The photo of the single scoop shows the quality and detail of how they were made, and that is the better message.

Re: Production Coffee Scoops

#24

Scoops Comment and Handle Idea

Raymond Overman in SC

>Ruth,

Those are excellent. I like the spokes picture the best. Good luck with the sales. I'm sure they'll fly out of the gallery.

In response to John and the handles coming off problem, Perhaps foxtail joinery may help secure the handle and relieve some stress from the glue joint? I haven't made any of these so this is just brainstorming.

Re: Production Coffee Scoops

#25

You're right, Russ. Thanks

Ruth Niles

>I just sent three pictures to the gallery, now I'm curious to see which she's going to choose.