Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

A suitable wood for saucepot lid handle?

Posts

A suitable wood for saucepot lid handle?

#1

A suitable wood for saucepot lid handle?

wilbur

>I broke the handle for a saucepot we have, and I thought, "No problem - I can turn a new knob!" But then I realized that whatever wood I pick will have to deal with heat and steam. A lot of steam. In fact, this pot is what we use to steam food in when we're cooking.

The way the lid is designed, the knob will be screwed into the lid, and the screw head is big enough that the knob won't be in direct contact with the steam. But it will be in close proximity as the steam escapes through the vent holes.

Any suggestions? I thought white oak was supposed to be somewhat waterproof.

Re: A suitable wood for saucepot lid handle?

#2

Re: A suitable wood for saucepot lid handle?

nailshooter

>Most seem to favor beech. It is closed grained, finishes well, and will stand up to washing with some common sense. That's why so many use it as a choice for kitchen utensils.

Robert

Re: A suitable wood for saucepot lid handle?

#3

Re: A suitable wood for saucepot lid handle?

John Pickett

>Same thing happened here. i used a piece of maple left over from turning a rolling pin. i've had no problems with it.

Re: A suitable wood for saucepot lid handle?

#4

Re: A suitable wood for saucepot lid handle?

Barbara Gill, Remlik VA

>I know of a guy who used Black Locust for the handle of the door of a big iron BBQ rig. It held up very well.

Re: A suitable wood for saucepot lid handle?

#5

Re: A suitable wood for saucepot lid handle?

Eric Kuehne

>Or, for a more unusual choice: teak. Good enough for boats. Natural oils.

Re: A suitable wood for saucepot lid handle?

#6

This could be sacrilege but ... *LINK*

Jeff from MA

>...how about soapstone? I have been looking for something to use to replace the charred handles on my wood stove and thought it might be a good choice.


Turning Soapstone

Re: A suitable wood for saucepot lid handle?

#7

Re: A suitable wood for saucepot lid handle?

Allen Neighbors

>Bois d'Arc... AKA Osage Orange... it stays in the ground through thick and thin as fence posts here in West Texas... some of them are over 100 years old, and still holding up fencing. It withstands hot and cold, wet and dry, and cow poop. It oughta work well. I made a knob for a glass lid for my Granddaughter, out of it. It will age gracefully into a beautiful chocolate brown.

Just a suggestion.

Re: A suitable wood for saucepot lid handle?

#8

Thanks!

wilbur

>Thanks for the suggestions. I happen to have a scrap hunk of beech lying around, so I'll give that a try.