Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

How I turn the bottom of small hollow forms

Posts

How I turn the bottom of small hollow forms

#1

How I turn the bottom of small hollow forms

Ron in Drums PA

>This is a vacuum chuck I made with a 4" to a 2" PVC reducer. I use "foamies" for a seal and to prevent marring the form.


img

Re: How I turn the bottom of small hollow forms

#2

Cool...

Dave Belser

>What on earth is the bucket with the copper pipe for?

- Dave

Re: How I turn the bottom of small hollow forms

#3

Re: Cool...

Ron in Drums PA

>Dust collector on a microphone boom arm.

Re: How I turn the bottom of small hollow forms

#4

Re: How I turn the bottom of small hollow forms

John Kyler

>Ron

What the heck are "foamies".

John

Re: How I turn the bottom of small hollow forms

#5

Re: How I turn the bottom of small hollow forms

Ron in Drums PA

>sheets of foam that can be purchased at craft stores

Re: How I turn the bottom of small hollow forms

#6

Re: How I turn the bottom of small hollow forms

Allen Neighbors

>You can buy them at Wal-Mart, Craft Dept, "Foamies"... get the ones with adhesive on one side... 48 cents ... 8.5x11 sheets.

Re: How I turn the bottom of small hollow forms

#7

Re: How I turn the bottom of small hollow forms

George Van

>Thanks Ron, I like shop ideas! this is a good one.